Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Many problems with sniper

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Many problems with sniper

    Hey guys, need some help.

    I have a Swiss Arms SA1 which I believe is a VSR10 or Bar10 varient.
    I used it today and a skirmish, it was pooring of rain and guns got soaked (duhh)
    I have had problems before of miss feeding (which I fixed by pushing the mag further into the magwell. But then today it didn't cock probably neither did it shoot very far and sometimes it didn't fire at all (even though I done the feeding thing)

    Is this because it was wet and the rain got into the internals and messed with the spring or is this something else :s
    Tags: None
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0
  • #2
    Re: Many problems with sniper

    Take the bolt out, give the bolt/cylinder and bolt carrier a good wipe down, dry it all off and re-lube it. See where that gets you, should help.
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0

    Comment

    • #3
      Re: Many problems with sniper

      Okay thanks mate, i'll do that over the week
      • Thank the user for this post 0
      • Like this post 0
      • Dislike this post 0

      Comment

      Previous template Next

      About the Author

      Collapse
      Cursed Spooky Average person, nothing interesting Find out more about Cursed Spooky
      Working...
      X