Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Last post, promise :P TM l96

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Last post, promise :P TM l96

    So it HAS to be below 500 fps. Not 1 fps more. These aren't off zeroone but are these what I need/Any advice?

    1) PDI Marui L96 PRECISION CYLINDER Set HD - 140
    2) PDI L96 140 Spring 13mm diameter - 15
    3) First Factory PSS96 type96 zero trigger - 175
    4) KM (TN Inner Barrel) for Marui L96AWS sniper rilfe 500mm length - 55

    Totaling = 385.

    Don't want to spend any more than necessary so thanks in advance.

  • #2
    Re: Last post, promise :P TM l96

    Anyone?

    Comment


    • #3
      Re: Last post, promise :P TM l96

      right

      the first factory zero trigger WONT work with the PDI cylinder unit,

      you will need the PDI v trigger as it has the parts that fit the cylinder set,

      Comment


      • #4
        Re: Last post, promise :P TM l96

        As guard states,

        Go PDI VTrigger, piston and spring. Job done.

        No major need to change the barrel.

        Comment


        • #5
          Re: Last post, promise :P TM l96

          yes change the barrel :p other wise the accuracy wont be changed at all,

          change for a PDI .03 or their .05 as they are better made then the .01s

          also use the firefly hard or nineball hard hop rubber as your going over 380 FPS

          using .4s will be perfect for the weapon and will perform really well

          Comment


          • #6
            Re: Last post, promise :P TM l96

            Do i need to replace the hop up at all? Also my friends says he couldn't upgrade his l96 TM because there was no spring stopper? Is that true?

            Comment


            • #7
              Re: Last post, promise :P TM l96

              not at all....the PDI precision cylinder set is all you need minus the actual spring.

              Comment


              • #8
                Re: Last post, promise :P TM l96

                How easy is it to put the spring in?

                Comment


                • #9
                  Re: Last post, promise :P TM l96

                  if your on about putting the spring into the cylinder, 2 minute job mate

                  Comment


                  • #10
                    Re: Last post, promise :P TM l96

                    Yeah I am, thanks. Also will the trigger box come with screws as i have lost mine?

                    Comment

                    About the Author

                    Collapse

                    RPK for president. Love to airsoft whenever possible ,but Saturday school is a bitch! Find out more about RPK for president.
                    Working...
                    X