Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

which barrel?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • which barrel?

    Howdy, im starting out sniping and want to get the edgi 6.01 barrel but i have been told by others that a systema tight bor would be better.

    It will be going into a bar-10 with stock hop-up but a firefly hard hop rubber plus other upgrades and shoots 500fps give or take 5 fps

    Any ideas?

    Thanks
    Matt
    sigpic

    Airsoft.... Like Paintball, but for MEN!

  • #2
    Re: which barrel??

    Then you won't be able to fit either lol

    the bar-10 /vsr has specific hop units so the notches are different on the barrel

    plus look on the tech section mate for single action

    there is a hugh thread about upgrading the vsr- series
    read it carefully as gives alot of info

    Comment


    • #3
      Re: which barrel??

      If your gun shoots consistently between 495-505fps a 6.01 barrel will likely up the velocity to the point where it is consistently over the limit.

      Comment


      • #4
        Re: which barrel??

        Thanks for the replys guys, much love!!!

        Edit: ow and could i grab a link to that mate?
        sigpic

        Airsoft.... Like Paintball, but for MEN!

        Comment


        • #5
          Re: which barrel??

          Found it !
          sigpic

          Airsoft.... Like Paintball, but for MEN!

          Comment


          • #6
            Re: which barrel??

            A Thought then. Which hop up should i get and if i had the correct hop-up which barrel would you use?????
            sigpic

            Airsoft.... Like Paintball, but for MEN!

            Comment


            • #7
              Re: which barrel?

              Use the stock hop chamber but use a nineball hop rubber, it will take quite a few shots for it to settle in but once its settled it will be great.

              Then use a laylax 6.03 tightbore barrel (there are only two options for the VSR and should be in stock on zeroins website, get whatever size you want but if you can get the longer version).

              Then get all laylax cylinder internals, PDI are ok but expensive. And get appropriate sears.

              Comment


              • #8
                Re: which barrel??

                Originally posted by guard-sniper87 View Post
                Then you won't be able to fit either lol

                the bar-10 /vsr has specific hop units so the notches are different on the barrel

                plus look on the tech section mate for single action

                there is a hugh thread about upgrading the vsr- series
                read it carefully as gives alot of info
                Wrong btw Edgi barrels do fit the BAR 10 as i have one now
                sigpic

                Airsoft.... Like Paintball, but for MEN!

                Comment


                • #9
                  Re: which barrel?

                  Edgi barrel over PDI barrel over Laylax barrel in my opinion. They're all great though!
                  Originally posted by psirus101
                  I once got a player 100+ metres away by just pointing my finger and shouting "PEW PEW PEW". He took his ****ing hit!

                  Comment

                  About the Author

                  Collapse

                  Mattmeddings Find out more about Mattmeddings
                  Working...
                  X