Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

L96 upgrade queries?!?

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • L96 upgrade queries?!?

    Hey guys my mate has just recently bought a well warrior l96 of here and he wants to fully upgrade it with some good upgrades for it but not super expensive ones to give it more accuracy and more range. He would like it to be going at around 500 FPS but no higher than that as it is breaking the site limit. This is his primary so he wants it to be as good as he can get it for a reasonable price. Any ideas on some upgrades?

    Thanks in advance any help would be appreciated

    Thanks Nick
    For sale:

    -Splitting M4
    -MP5 Parts
    -MP7a1
    -M9 Magazine

  • #2
    Re: L96 upgrade queries?!?

    Please read the massive upgrade thread done by myself

    that will tell you the best set ups for different stages in fps
    and what you WILL need to install to insure a perfectly skirmishable rifle

    Comment


    • #3
      Re: L96 upgrade queries?!?

      ok i have had a look sorry for not having done so before, so what upgrades should he do first because he wants to spread out the upgrades across a few months but obviously cannot upgrade the spring without upgrading other stuff. So what should he upgrade first thing for around £25 to £50.
      For sale:

      -Splitting M4
      -MP5 Parts
      -MP7a1
      -M9 Magazine

      Comment


      • #4
        Re: L96 upgrade queries?!?

        I say accuracy first so make some barrel spacers. If you get a bigger you need new trigger at same time and prob new spring guide. If you want a new barrel (aeg one) then you'll also have to buy a new hop chamber and rubber. Barrel spacers make alot of difference though.
        Stop Drop And Roll

        Comment


        • #5
          Re: L96 upgrade queries?!?

          From experience I'd say get a new hop up (pdi for type 96 works best for me) and hop rubber Along with a tightbore barrel, I found a 6.03 works well for me. You could go for a 6.01 if you want but I prefer the 6.03. You'll need a standard aeg tightbore to fit the pdi hop. And buy / make the barrel spacers.
          Defiantly follow guards guide on upgrading further but id start with the barrel and hop first
          . .

          Comment


          • #6
            Re: L96 upgrade queries?!?

            There a pissing thread about it all

            Use it then will answer the questions

            Or you lot incompitent to scroll and read at the same time

            Comment


            • #7
              Re: L96 upgrade queries?!?

              Chill Guard, Chill.

              http://www.zeroin.co.uk/showthread.php?t=67889

              I don't know how anyone could miss it, its only the top sticky in the section.

              Comment


              • #8
                Re: L96 upgrade queries?!?

                All that needs to be said really.

                Closed!
                sigpic

                Comment

                About the Author

                Collapse

                wilko129 Find out more about wilko129
                Working...
                X