Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

TM VSR started slam firing???

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • TM VSR started slam firing???

    Been using this around 6 months

    470fps
    all the upgrades are done

    I dont have a zero trigger just use laylax sears and was wonding if they could just be wearing down?

    It just slam fires say one in every 30 times and im wondering of and what would be best to start looking at first?

    ash
    Check Out My Sales;
    http://forums.zeroin.co.uk/showthrea...rs-and-adaptor
    http://forums.zeroin.co.uk/showthrea...r-Impulse-buys

  • #2
    Re: TM VSR started slam firing???

    I don't have one I have an L96 but I'm guessing same kinda thing.
    This happened to my L96 just before the stock trigger mech exploded because the sears had worn down.
    So I'd start by looking at the trigger mech especially the sears.
    Stop Drop And Roll

    Comment


    • #3
      Re: TM VSR started slam firing???

      my tm l96 slam fired recently, the screws holding the trigger mech on had come lose. its worth a look. other wise its the sears
      Taking hits since 2007

      UNIT 13

      Comment


      • #4
        Re: TM VSR started slam firing???

        Sears! I would try and resist shooting the gun until you find out/replace the worn put part
        Originally posted by anthonyyoungs1989
        The cans brand new... I'm clearly not retarded.

        Comment


        • #5
          Re: TM VSR started slam firing???

          cheers guys and i will do. got a day off tomorrow so going to take her apart and have a look. may be the push i needed to go for a zero trigger.
          Check Out My Sales;
          http://forums.zeroin.co.uk/showthrea...rs-and-adaptor
          http://forums.zeroin.co.uk/showthrea...r-Impulse-buys

          Comment


          • #6
            Re: TM VSR started slam firing???

            What piston are you using

            If it's the laylax red it maybe wearing down hense the piston sear not catching correctly

            The bolt housing screw holes for the trigger mech are threaded means the trigger mech has latiral movement, not catching,

            Comment


            • #7
              Re: TM VSR started slam firing???

              sounds daft, but the laylax spring guide can unscrew slightly and for some unknown reason causes slam firing

              maybe my vsr is just a odd one tho eh lol

              Comment

              About the Author

              Collapse

              ash8811 Find out more about ash8811
              Working...
              X