tm vsr10 cylinder head

[I love Airsoft]

hey all I have a 2nd hand vsr and has been upgraded by the previous owner and is now shooting at 420fps 0.2g. Does this mean I can just twist the cylinder head off and not have to drill the screw out? cheers

[dazz666]

Re: tm vsr10 cylinder head

if the cylinder has been upgraded with spring guide, piston and spring for example, on the VSR the pin should have already been drilled out.

If it hasn't you'll need to drill this out before the cylinder head will unscrew - which prob means you still have the plastic stock piston ect.

You don't get this problem with Bar10 rifles.