JG BAR 10 silencer adapter

[IIII Phil IIII]

Hi guys,
I have the normal BAR 10 not the g spec. Was wondering if there is a way of fitting a silencer on to the gun. Also do you have to take off the end of the barrel to attach it, and how?
Thanks, Phil

ps. on the manual it says pro sniper version.

[jackwarz]

Re: JG BAR 10 silencer adapter

Yeah, I also was wondering this how do you get the end cap off?

On some VSR's it's easy and some VSR's it seems impossible.

Help would be appreciated!

Jack

[HuntR]

Re: JG BAR 10 silencer adapter

To get the end cap off you have to use the little tool included. It's the odd looking plastic thing. Put it into the end cap, grab a pair of pliers or a vice grip and twist. Lefty loosey righty tighty. If you don't have the tool you'll have to jam something in there to get the job done. I jammed a screwdriver in mine when i lost the tool. Worked fine for me.

But.... if you do end up having to use a screwdriver to do it, make sure you have the barrel and hopup out of the outer first. Otherwise you could risk damaging your barrel

[Kev.D]

Re: JG BAR 10 silencer adapter

Exactly what Hunter said. Try a KA 14mm +/- threaded adapter. Its what I've always used.