Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

uhc super 9 pro - hopup problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • uhc super 9 pro - hopup problem

    hello all, gotta a problem with my super 9, the hopup isnt adjusting.
    the bb gets around 20 meters if that and spins up loads making the guna rubbish ( or more as some may think ) ive had it apart and looked at it when apart it looks like the rubber is hardly proud but when the hopup system is in the gun the rubber is proud and dont under stand how its getting pushed down to much anyone every had simular problem ?

    Also ive looked a fare bit but found nothing can you get any more power out of these at all ?

    Cheers

  • #2
    Re: uhc super 9 pro - hopup problem

    You can upgrade the spring but the piston is held together with pins, these needs to pulled out, not bashed out and replacing, (car shops are your best bet for replacements as motors use them a lot)
    As with the hop up iam not sure why you have that problem, after stripping mine down completely today (except the piston) i couldn't see a reason why it would prtroud more.
    Have you just tried changing the rubber?
    Mine is the original, and after having for a day its getting changed to every three to four shots goes where ever it wants!

    Comment

    About the Author

    Collapse

    rockers Find out more about rockers
    Working...
    X