Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

My Broken L96

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • My Broken L96

    I have an AGM L96, and it has been broken for some time. I do not have a clue what is wrong with it, so if you could give me some ideas it would be much apreciated!
    I have already tried getting a new spring, and a new piston!

    Thanks
    Ghillie suits, You can't Kill, What you can't see!

  • #2
    Re: My Broken L96

    Whats the problem


    is it not firing?
    not cocking?
    not loading bb's?

    Comment


    • #3
      Re: My Broken L96

      Yes, sorry Destroyer.
      In reply to sk8inmadkid, it loads, it cocks, and fires. But when it fires the fps is about 150fps, instead of 400+.
      Ghillie suits, You can't Kill, What you can't see!

      Comment


      • #4
        Re: My Broken L96

        it could be the floowing things.

        the barrel. needs a clean.
        airseal, put ptfe tape aroung the cylinder end.

        Comment


        • #5
          Re: My Broken L96

          I have already replaced the spring, and the piston. And i do not wish to keep purchasing countless springs, as the first spring "broke" and the second. But I do not know if the spring has actually broken.
          Ghillie suits, You can't Kill, What you can't see!

          Comment


          • #6
            Re: My Broken L96

            make sure the cylinder is screwd tightly all the way and that the cylinder is locked into the hop and theres a seal

            Comment


            • #7
              Re: My Broken L96

              is it regularly cleaned?

              what weight bb's do you use?

              Comment


              • #8
                Im not familiar with the parts in guns, so I will attempt to remove the trigger mechanism but I will not remove anything.

                I use 0.2G i think, i havent been since plan c. I have not used the gun since then either, but i have cleaned it a few times since then.
                Last edited by Rampage; 10 February, 2009, 21:41.
                Ghillie suits, You can't Kill, What you can't see!

                Comment


                • #9
                  Re: My Broken L96

                  josh il give you a few filters to fire out the barrel tomorow,
                  cleans them up a bloody treat,
                  just shove it down with a loading rod,
                  and is your barrel alined with the piston properly?
                  it could be catching slightly or something
                  peace up ace down

                  Comment


                  • #10
                    Re: My Broken L96

                    Also - a slightly heavier BB maybe if it starts firing well again

                    Comment


                    • #11
                      Re: My Broken L96

                      Ok cheers, thanks for your help everyone. I'll have a look tomorrow and fill you in on what i see, i may put a few pics up see if you can see anything wrong!
                      Ghillie suits, You can't Kill, What you can't see!

                      Comment


                      • #12
                        Re: My Broken L96

                        Best of luck mate - hope you can sort it


                        Its a pain in the ass having a lovely weapon that starts shooting like sh*t! (like my last skirmish, I coulda spat further......and straighter too!)


                        - Jon
                        Last edited by Rampage; 10 February, 2009, 22:25. Reason: Language

                        Comment


                        • #13
                          Re: My Broken L96

                          have u sorted this out bud if not id be happly to look over it if ur near the northwest

                          Comment


                          • #14
                            Re: My Broken L96

                            HAHA unlucky mate

                            probly the one dude that could help you by looking at it is on the other side of the country,

                            that sucks!
                            Signature Removed

                            Comment


                            • #15
                              Re: My Broken L96

                              It is still broken, and I do not have a clue how to remove the bolt and check the seals!
                              Any idea, its AGM not Warrior!
                              Ghillie suits, You can't Kill, What you can't see!

                              Comment

                              About the Author

                              Collapse

                              peaky Armoury: AGM L96 Find out more about peaky
                              Working...
                              X