Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

TM L96 AWS cylinder head!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • TM L96 AWS cylinder head!

    Trying to upgrade my spring in my TM L96 AWS and i cant get the dam cylinder head off! there are no videos out there or picture guides as to how to get it off! ive tried to get it off but just ended up scratching the head!

    Any advice will be much appreciated!

    Musherz

  • #2
    Re: TM L96 AWS cylinder head!

    You have to drill out the pin in the cylinder before you can unscrew the cylinder head.

    Comment


    • #3
      Re: TM L96 AWS cylinder head!

      how deep does the pin go?

      Comment


      • #4
        Re: TM L96 AWS cylinder head!

        I have done this on my tm l96. The pin is only a couple mm in. Just find a small drill, and drill straight through, then the sylinder head will come straight off. I run mine with a laylax cylinder head, spring guide, piston, and laylax trigger group. Bare in mind that the PDI and laylax springs and spring guides arent complementary, but i think some vsr springs will fit straight on the spriing guide

        Comment

        About the Author

        Collapse

        musherz Find out more about musherz
        Working...
        X