L96 swapping inner barrel with M4?

[181jenkins]

hey guys so i have a hopup that will let me use a AEG barrel, my question is i have a custom M4, with a Nice inner Barrel not stock,

my question is should i swap out my M4 barrel to put into my L96, is a bit shorter... so im not sure how it would work out, fps, and accuracy

i know that i woul have to make some more Barrel spacers as the Barrel will be shorter there fore needing more support.


any advice would be great,


would like to add if any one has a Longer Non stock inner barrel(tight bore)
that they would like to swap for a M4 crain stock, (tm i think it is)
hit me up in a pm

[r6shooter]

Re: L96 swapping inner barrel with M4?

only go for the same size as the l96 or the 510mm with silencer adaptor

otherwise you'll suffer a tiny bit with the hop settings etc and bbs hitting the flash hider

so stick with 510 barrels
or the L96 stock length 490 mm

[badas]

Re: L96 swapping inner barrel with M4?

You also need to modify a standard M4 inner barrel as the L96 hop doesn't take AEG barrels without some custom cuttings.

[181jenkins]

Re: L96 swapping inner barrel with M4?

ok thanks guys btw i have a hopup that will let me use AEG barrels :P

[r6shooter]

Re: L96 swapping inner barrel with M4?

AND ive said the drop to the aeg barrel from your m4 will make it worse ...

stick the the 490 standard L96 barrel

or a 510mm tb barrel then you will need the thread adaptor on the muzzle of the rifle to hide the exposed inner barrel