No announcement yet.

British collection

  • Filter
  • Time
  • Show
Clear All
new posts

  • British collection

    Hi guys.

    I would like an evaluation on my collection please.

    I would like to point out that at this stage I am NOT selling or willing to split any parts.

    I just want a rough idea on prices until such time I do decide to sell.

    This collection has alot of real parts across the board and alot of one off piece/parts.

    All FPS are unknown at this stage, but will be checked upon time of possible sale.

    Make/brand: Ares Aw338 spring

    Any accessories included:

    2 magazines

    Guarder scope

    Harris bipod

    This has had a custom made accurate flash hider fitted. Is also covered in tan scapa tape as done in Afghanistan.

    Make/brand: King Arms L1A1 SLR aeg

    Any accessories included:

    4 mags

    RS rifle sling

    This rifle includes alot of RS parts...
    Stock, handguard, rear sight, sling, sling swivels, carry handle.

    ( real parts Not fitted- cocking lever, front sight block, take down lever)

    This has had alot of attention to detail like proof stamps, stamped fake bolt, extra serial number and weathered.

    Make/brand: Ares L85/L123 UGL aeg

    Any accessories included:

    2 mags

    ARES susat


    RS barrel cap for ugl

    RS switch holder

    The rifle is pretty standard.
    The ugl has had a few tweaks.
    A few rs parts added. Correct screws added. The bartel has been machined down to resemble a real one and can no fit the rs barrel cap.

    Make/brand: Mixed M16 Model 711 aeg

    Any accessories included:

    This rifle has been made to an exact replica of the infamous sas m16.

    The lower is the ultra rare guarder M16 A2 lower with the correct m16 Export markings. The upper is a G&P m733 upper to replicate the C7 upper used.

    The barrel, front sight, flash hider, mag release, selector lever, forward assist, bolt release are all STEEL!.

    Not pictured but now fitted is also a real M203 side mounted quadrant sight, usually found mounted to the side of upper receiver.

    Internals at the moment are just a standard G&P.

    Make/brand: ICS L85 aeg

    Any accessories included:

    Accurate acog with wing mount

    Acog riser

    Surefire F/H

    Llm01 (not working)

    Grip pod

    Magpul DD rail.

    Internals are all standard. Has been weathered and butt numbers added.

    Make/brand: Mixed L119 A1 SFW aeg

    Any accessories included:

    Yet again, alot of RS and rare parts on this.
    Has correct type steel front sight (not warlord tactical version)
    A rare steel barrel, collar & dragon red receiver.
    Real parts include;

    Stock & pad

    Sling mount

    D.I.S (carry handle)

    Delta ring

    K.A.C rail & covers

    Non m203 end cap

    Castle nut

    Barrel & hop are G&P. Gearbox is unknown.

    Make/brand: DE M56 spring (L128 combat shotgun)

    Any accessories included:

    Nothing exciting on this. Comes as is and is completely stock.

    10 tm shells

    Make/brand: G&P C8 Carbine aeg

    Any accessories included:

    This is a completely stock G&P mk18, but swapped the receiver for the C8 marked.

    Comes with a clone acog. G&P peq2 box.

    For the purists out there. The front sight has had the bayonet lug taken off, but the barrel is still a tad too long and is incorrect.

    Also comes with a real matech buis sight.

    Make/brand: G&P M870 shotgun spring (L74A1)

    Any accessories included:

    This is completely stock.

    Have added a steel folding stock. Needs a bit of tlc but folds and holds firm when open.

    The torch grip has had the torch swapped out for the correct surefire style end.

    Make/brand: Classic army MP5 A3 aeg

    Any accessories included:

    This is still a W.I.P.....

    This is based on the actual weapon used in the embassy siege.

    Internals are stock.

    Has a real scope mount and SL20 torch. Mount itself is a replica.

    The receiver screw pins have now been changed for real mp5 push pins.

    Cocking lever and rear sight are now steel.

    The hard to find LE A3 handguard and adaptor fitted.

    Not mounted yet, but also have the guarder early style steel trigger.

    10 metal mid caps. Believe to be G&P!

    To complete the look would only need the early style smooth flash hider and stock.

    Make/brand: Classic army MP5 SD6 aeg

    Any accessories included:

    This is all standard.

    Comes with a tm scope mount

    Guarder 4x28 scope.

    L.P.E torch mount

    G&P 6P torch.

    Only fault is a section of the stock arm has a chunk missing.

    Make/brand: WE browning. L9A1

    Any accessories included:

    This build is based of the MK2 versions in use.

    internally standard.

    Externally has had quite a bit of work.

    Rear sight removed, filled and smoothed off. Real mk2 front and rear sight added.

    Grips have a groove cut in one conr to fit around a real sling loop that has been added. It has also had correct trades added. Only issue is the trades were laser engraved by accident and not deep engraved.

    Make/brand: WE Gen 4 Glock 17 L131A1

    Any accessories included:

    Has correct traded upper and lower. Later versions were just marked WE.

    Comes with one mag which does not hold gas!.


  • #2
    O honestly wouldn't know where to start with pricing on this lot but if you figure it out i'd be interested in the M16, L119 and Browning.
    HK MP5k PDW//IMI Uzi//HK MP5a4//HK MP5a5//M3 Grease Gun//HK51//L119a1//HK G36k//Colt M653//Colt M733 with M203//Steyr AUG A1//AMD 65//DSA SA58//Colt M16vn//H&K G3a3//Sig P226//Colt 1911a1//Sig P226r//STI 2011


    • #3
      Any ideas guys?


      • #4
        To collectors and reenactors you're easily looking at 250-300 plus per gun. The attention to detail in these is superb. Id be particularly interested in the L1A1 and L9A1 if you wanted a quick sale


        • #5
          Pm u mate

          Sent from my iPhone using Tapatalk


          About the Author


          Darkmikey22 Find out more about Darkmikey22