Zero one or blaster

[The General]

Re: Zero one or blaster

Last time I used some .25's in the blue bag from Z1 the bb's were fairly inconsistent in several of my guns (far more fliers and some bb's under and over hopping) and they would not feed happily in my TM USP AEP magazines, nor my KSC Glock magazines. I used some Blaster Pro grade and the problem disappeared immediately. They are cheap for a reason. I won't use them in my guns.

What is the point of having a superb gun with upgrade parts and running nicely to then feed it cheap BB's? I won't call them cheap and nasty as that would be a bit unfair.

I like Blaster Devils the most at the moment, though any Blasters are worth the extra.

[original poster]

Re: Zero one or blaster

Need to get a bulk load of Blaster Devils I think!

[gezer]

Yep I'm getting me some blasters

[original poster]

Re: Zero one or blaster

Do Zero One sell them in bulk? (Too lazy to look )

[original poster]

Re: Zero one or blaster

It turns out I'm not lazy enough!

Noticed they do just under 80,000 Excel .25's for £215, may go for them!

[Black Templar]

Re: Zero one or blaster

80,000? That's one big assed mag you got there.

[original poster]

Re: Zero one or blaster

80,000? That's one big assed mag you got there.

I doubt it would fit in the car haha!

[iBakez]

Re: Zero one or blaster

Any Blaster BB but the devils are a favourite right now

[Caveira]

Re: Zero one or blaster

I'd been using Z1 0.25s for about 3 years with no problems at all, then earlier this year they just started causing jams and loss of range and power. I switched to Blaster Devils and have had no problems at all since.

Having said that, I tried Madbull 0.36 in my DMR and pistols, but have found that the Z1 0.30s are just as accurate and (if anything) are more consistent.

[gezer]

Ok so my .36 go dead straight
I might need to file a bit more on the hop
So I can get cheaper bbs (lighter = cheaper)

Just tappin away

[gezer]

Also this isn't relevant to the title but I don't want to clog up the forum
My gun stoped firing midway through my mag of .36
Tried the spring release but still not firing
(Trigger moving freely but no movement of the gears)
I opened her up put a lipo on and fired it to see if the gears were spinning and they were,
Closed it back up and it was firing again
(Ics m4 with a Firefox lipo,shs motor and gears, aws stealth fet)
What the hell caused this?

Just tappin away

[dave38x]

Re: Zero one or blaster

Stick that up in electric tech for a quick answer, you say you changed the battery?

[gezer]

Stick that up in electric tech for a quick answer, you say you changed the battery?

No I just unplugged it, got the upper away from the lower receiver (like you normally do with an ics m4)
Plugged the same batt back in, pulled the trigger and gears spinning, closed it up and shot a few on semi
Worked as soon as I closed it back up