Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Hop unit - hop rubber - barrel database

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hop unit - hop rubber - barrel database

    Because of the many many threads that keep popping up about what's the best internal upgrades to achieve the best range maybe it should be kept in one thread and members should add their input as to what make of gun they have and what upgrades they used to get the needed range?

    So have a template such as

    Make: TM
    Model: M4 cqb
    Barrel: XYZ 6.01
    Hop: XYZ
    Hop unit: XYZ
    Other mods: shimmed hop ect

    And a description of what it was like stock, what improvements it makes and if there are any FPS variances

    If everyone contributes we could build a small database of what's the best way to improve your own gun just by looking through here?

    Plus a few people could learn a thing or two

  • #2
    Re: Hop unit - hop rubber - barrel database

    Make: Tokyo Marui
    Model: Recoil Range, M4 Sopmod CQBR
    Barrel: Prometheus 6.03 Tightbore
    Hop: Firefly hop rubber with Firefly flat nub
    Hop unit: Standard TM Recoil hop
    Other mods: Nothing relating directly to the hop unit

    FPS is very consistent, 340-343 on .2's.

    Range is currently around 60 metes however with the hop fine tuned I think this will be increased.

    Comment


    • #3
      Thanks for getting the ball rolling

      Comment


      • #4
        Re: Hop unit - hop rubber - barrel database

        Make: Tokyo Marui
        Model: M4 A1 (non recoil)
        Barrel: Stock TM barrel electroplated to 6.01
        Hop: Madbull Shark (Red coloured one) with X bucking
        Hop unit: Standard TM two piece hop
        Other mods: None

        Despite being in desperate need of a new spring (currently chrono-ing very consistantly at 220+/- 3fps) will happily reach out to 50-55m before starting to fall to the ground (sadly takes an age to travel that distance but travel it, it will)

        Comment


        • #5
          Re: Hop unit - hop rubber - barrel database

          Perhaps not the most useful entry to the DB given that its not exactly a stock gun, but it can always be ignored or deleted...

          Make: APS - Yes I know...
          Model: ASR-107 - Sort of. Original upper and lower receiver, stock, stock tube and gearbox shell. Replacement 10" barrel, silencer, rail system
          Internal modifications - ASG m100 mainspring, Madbull full-teeth piston, otherwise complete ASG ultimate internals...
          Barrel: Lonex 407mm (ID-6.03mm) Tightbore
          Hop: Madbull blue
          Hop unit: Madbull Ultimate
          Other mods: Barrel shim mod

          Stock perfomance - 380fps +/- 10fps with .2g's - Way too hot!

          Current performance - 301fps +/- 1fps with .25g's (Translates to ~340fps with 0.2's)
          Range - ~58 metres (not bad)
          Accuracy - Genuinely exceptional - Mainly down to the barrel

          Comment

          About the Author

          Collapse

          Jez Armstrong Find out more about Jez Armstrong
          Working...
          X