Help with Tm Sig 552 HOP UP!

[Goony]

Hi guys basically due to me snapping my sig 552 body , i took my sig body off and replaced it with a new one. Since of done that the hop up wheel dose not work! I can keep spinning it and it wont stop to indicate hop up is fully on/ off! . Atm its contantly on off. I think i might have dislodged the hop up bucking when putting the new body on as you have to move the barrel and hop up chamber off from the motor (sliding it forward) . Can anyone gimme any help with fixing the hop up??
heres a disembly instructions
http://www.858airsoft.com/howtos/sig552disam.html
any help would be appriciated

regards

[JMusa]

Re: Help with Tm Sig 552 HOP UP!

i did the same thing with my m4
next time your at twa get it checked out and if it is the bucking
get a hurricane rubber and bucking and they should fit it for you
also it adds more range

[Goony]

Re: Help with Tm Sig 552 HOP UP!

ahh thanks i get one of the technicians to check it out next this sat, oh do your think i could of just dislodged the bucking? also you wouldn't have a hop up key for a ksc glock would you?

[TheLazyMarksman]

Re: Help with Tm Sig 552 HOP UP!

I'd disagree, I myself would choose TM for everything hop-up but anyway, take out the barrel again, then look for problems or anything out of the ordinary. If it still does the same problem, remove the unit from the barrel and close examine it.

[JMusa]

Re: Help with Tm Sig 552 HOP UP!

ahh thanks i get one of the technicians to check it out next this sat, oh do your think i could of just dislodged the bucking? also you wouldn't have a hop up key for a ksc glock would you?

nope sorry mate i just sold mine
but yeah next time your down at twa ask martin to take a look at it

[Goony]

Re: Help with Tm Sig 552 HOP UP!

alright i will give that a go! aeg internals are soo complicated though! unlike a simple gas bb pistol

[JMusa]

Re: Help with Tm Sig 552 HOP UP!

yeah i know thats why iv decided too steer clear of aegs
i just stick to spring rifles and gbb pistol

[TheLazyMarksman]

Re: Help with Tm Sig 552 HOP UP!

*Face palm* - Its not that complicated, Very easy to understand once its under your belt. - back to the topic, did you check the hop-up?

[Goony]

Re: Help with Tm Sig 552 HOP UP!

yes i did and it looks fine i will get a technician at twa to have a propper look
oh will he charge me for it?

[JMusa]

Re: Help with Tm Sig 552 HOP UP!

no he wont just for taking a look
he may do if work is gonna be needed

[Goony]

Re: Help with Tm Sig 552 HOP UP!

do u think he will charge if all he needs to do is put the bucking back in place or something?

[JMusa]

Re: Help with Tm Sig 552 HOP UP!

he didnt with mine
dont worry if youre unsure bring a few quid extra

[screwdriver]

Re: Help with Tm Sig 552 HOP UP!

remove hop and barrel from the gun and then pull hop adjuster cylinder foward.
when pushing hop adjuster back ensure the hop lever lines up with spiral slot in adjuster so as you turn lever goes up and down in hop assembly.
it is very easy to put this type of hop back together incorrectly

[Goony]

Re: Help with Tm Sig 552 HOP UP!

remove hop and barrel from the gun and then pull hop adjuster cylinder foward.
when pushing hop adjuster back ensure the hop lever lines up with spiral slot in adjuster so as you turn lever goes up and down in hop assembly.
it is very easy to put this type of hop back together incorrectly

alright mate im trying that now thanks

[JMusa]

Re: Help with Tm Sig 552 HOP UP!

gd luck
lol
hopups are tricky