Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

fitting a large 9.6 into an M16 stock

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    fitting a large 9.6 into an M16 stock

    Has anyone manage to modify a G&P M16a3 stock to fit a large 9.6v batttery?

    If so what did you do?
    Tags: None
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0
  • #2
    Re: fitting a large 9.6 into an M16 stock

    Surely it would fit without modification?
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0

    Comment

    • #3
      Re: fitting a large 9.6 into an M16 stock

      If it cannot actually fit, you could always file down for some space inside the stock.
      • Thank the user for this post 0
      • Like this post 0
      • Dislike this post 0

      Comment

      • #4
        Re: fitting a large 9.6 into an M16 stock

        it should fit
        #my 8.4 fits in there with a bit of space
        Originally posted by parky
        If you're looking for a good sniper, I hear Vassily Zaitsev is good this time of year.

        It's sniper RIFLE.

        What do they teach these 19 year olds these days...
        • Thank the user for this post 0
        • Like this post 0
        • Dislike this post 0

        Comment

        • #5
          Re: fitting a large 9.6 into an M16 stock

          Its about 1 cm to long. The battery I think reaches the narrow part but cannot then fit any further :S

          Maybe this battery is a larger than large vapex...
          • Thank the user for this post 0
          • Like this post 0
          • Dislike this post 0

          Comment

          • #6
            Re: fitting a large 9.6 into an M16 stock

            I had this issue. And as the stock bolt went all the way through the stock on mine, no matter what i filed it split my stock open. So i then duct taped it and covered it in scrim net
            • Thank the user for this post 0
            • Like this post 0
            • Dislike this post 0

            Comment

            • #7
              Re: fitting a large 9.6 into an M16 stock

              Got a G&P M16VN sitting here that I'm working on, 9.6v 3300mAh seems to fit fine?


              Please get in touch if you want general help. Please report problematic posts.

              Take responsibility for your choices. If you break any rule in life, you should be held accountable.
              • Thank the user for this post 0
              • Like this post 0
              • Dislike this post 0

              Comment

              • #8
                Re: fitting a large 9.6 into an M16 stock

                Can depend how the wiring is, on the M14 stock you can feed a wire back into the stock kind of, and fit a 8.4 4600 MAH (which is very big)
                • Thank the user for this post 0
                • Like this post 0
                • Dislike this post 0

                Comment

                • #9
                  Re: fitting a large 9.6 into an M16 stock

                  mine fits fine! the best thing about G&P full stocks is that the screw doesnt go all the way down like others do. should fit fine mate
                  sigpic
                  • Thank the user for this post 0
                  • Like this post 0
                  • Dislike this post 0

                  Comment

                  Previous template Next

                  About the Author

                  Collapse
                  sniper34d Find out more about sniper34d
                  Working...
                  X