Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

How to slightly bulk up handguard to fit gun.

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    How to slightly bulk up handguard to fit gun.

    Basic details here, mp5 handguard with the holding fins snapped off inside the rear end.
    Trying to fit it to g&g mp5. The g&g does not have slots for the pins anyway but the opening of the rear of the handguard is slightly wider than the edge of the guns body.
    I have temporarily (last 3/4 games) just had a few pieces of leather wrapped through the edges of the handguard which hold it tight against the body. But the leather keeps coming loose and also the handguard has a slight wobble to it which is less than ideal.

    What I would like to assertain is the best way to bulk up the inside edge of the handguard to fit the gun.
    I have considered epoxy putty like milleput Etc but not sure how well it would hold up long term.
    Any better suggestions?
    Tags: None
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0
  • #2
    Re: How to slightly bulk up handguard to fit gun.

    hot glue mate
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0

    Comment

    • #3
      Re: How to slightly bulk up handguard to fit gun.

      Good shout... Can you buy black hot glue?!? Or sharpie!
      • Thank the user for this post 0
      • Like this post 0
      • Dislike this post 0

      Comment

      Previous template Next

      About the Author

      Collapse
      Pepperisit Find out more about Pepperisit
      Working...
      X