Need help with charger.

[Zedhan]

I have just received my smart charger which I ordered a few weeks ago. The clip part that plugs in to the battery to charge it is to large for the battery its self. I was wondering if it was possible to get an adaptor of some sort to fit on to the charge then on to the battery.

The charger and battery are NiMH

[Saltyyy]

Re: Need help with charger.

You can get adaptors for your connectors. I assume you don't know the connector name, post up some pictures and we can ID them for you
Going off of what you said I assume you have a Large Tamiya connector on the charger, and a mini tamiya connector on the battery, but will need pictures to verify this.

[Zedhan]

Re: Need help with charger.

You can get adaptors for your connectors. I assume you don't know the connector name, post up some pictures and we can ID them for you
Going off of what you said I assume you have a Large Tamiya connector on the charger, and a mini tamiya connector on the battery, but will need pictures to verify this.

I can't get pictures at the minute but I can verify that it is a Large tamiya on the charger and small on the battery. Also it's a small one on the gun.

[Stealthkiller]

Re: Need help with charger.

Any rc shop will have adaptors as will Airsoft shops

[Viper Scout]

Re: Need help with charger.

Your airsoft will probably supply a connector.
So now you have a smart charger, you can discharge aswell.
I take my 8.4 nimh's down to 7.1v before charging them back up again.