G&G Blowback Range Charging Handles

[WillGreen]

I have the G&G EBB 416, and during my first outing with it, the small 'lever' on the charging handle vanished, so now I can't seem to pull back the bolt all the way to access the hop up wheel properly (I assume that's what the part did, since it was fine in the morning).

As far as I'm aware, the charging handle is a fairly common part, but would any M4/M16 charging handle fit, or will I have to get one specifically for the blowback range?

[NinjaAxle]

Re: G&G Blowback Range Charging Handles

the charging handles are very different to normal ones, they hook on the top of the blowback mechanism, you'll have to get a G&G blowback specific one. they are however incredibly easy to fit. just push the front body pin out, pull the handle back and slide the upper receiver forwards. it's held on with a hook through a spring. just make sure with the new one it hooks back over the blowback mech.

[WillGreen]

Re: G&G Blowback Range Charging Handles

Cheers, saved me about £25 there.

Now to try and source one.