wanting to upgrade my cyma ak47

[Erik.v.v]

I am wanting to upgrade my guns rate of fire and its range/accuracy and i am not really sure on what to upgrade to achieve this any suggestions?:D

[TAKEDA88]

Re: wanting to upgrade my cyma ak47

Tight bore barrel for a start mate cant go wrong with that

[Erik.v.v]

Re: wanting to upgrade my cyma ak47

Ok, what length of barrel should i get for it to be able to fit in my ak47? Also what diameter would be best?

[Tiercel]

Re: wanting to upgrade my cyma ak47

AK inner barrels are 455mm. Go with a madbull black python V2 6.03mm, cant go wrong with one. Whilst youre at it, pop a guarder clear hop rubber on it. Ive put that combo in my cyma AK74 and it shoots like a beast.

[wedge75]

Re: wanting to upgrade my cyma ak47

6.02/6.03 would be the best bet mate not sure on length though

[ZBULLET]

Re: wanting to upgrade my cyma ak47

An active braking mosfet and if you don't know what that is read my explanation

MOSFET will remove the current that normally has to travel through your trigger switch to your motor to power your AEG. Trigger switches have a higher resistance that you might think. That means reducing the amount of power going to your motor. Think of it this way, can you get all the performance out of your car by removing 2 of the cylinders? Nope. The power is there to be had, but you’re just not using it all. The MOSFET redirects the power so when you pull the trigger, the power goes from the battery through the MOSFET and to your motor. There is almost 0 resistance, therefore almost every drop of power reaches your motor!

[ste887]

Re: wanting to upgrade my cyma ak47

hang on a sec.
what model number is the ak?
because from cm035 onwards they came with 6.03 barrels fitted
just stick in a marui hop rubber and your done.
for rof get the dream army high sped motor

[guard-sniper87]

Re: wanting to upgrade my cyma ak47

Or you could look In The search function
and also google the questions as many other places give guides and ideas

also there is a tech section for electronic weapons

Look in there as there are many threads about ak's and upgrades etc

[Newsh]

Re: wanting to upgrade my cyma ak47

Did they? Thats cool! I have a CYMA Ak105, but I'm unsure what model that is? I think it may be CM031 so i might have shit-out

hang on a sec.
what model number is the ak?
because from cm035 onwards they came with 6.03 barrels fitted
just stick in a marui hop rubber and your done.
for rof get the dream army high sped motor

[Erik.v.v]

Re: wanting to upgrade my cyma ak47

ermm my ak47 is a Cm.28 so would that have a 6.3 mm barrel in it already? and what size motor would i need to get for it to fit in the pistol grip? thanks for all the advice guys