Ris Help

[ZBULLET]

Hi people

i'm wanting to put an eotech 552 on my DE M56A but this is the problem what ris would fit?

Thanks ZT

[Ominous Slayer]

Re: Ris Help

20mm

[ZBULLET]

Re: Ris Help

But some people say it wont fit one?

[Ominous Slayer]

Re: Ris Help

Well I've had a couple, and all I've seen have fitted 20mm. It will have details wherever your purchasing it from, saying what it fits.

[Apurturesci]

Re: Ris Help

Wait, does the shotty have a top rail already?

[Evilllamas]

Re: Ris Help

all Eotechs fit 20mm, as do most sights that you would use for airsoft.
there is an 11mm rail for air rifles/ pistols.

[ZBULLET]

Re: Ris Help

Wait, does the shotty have a top rail already?

No Sadly

[BringOnThunder]

So what you are asking is can you drill some holes in your gun and screw an aftermarket rail on? Yes you can.

Sent from my HTC Desire using Tapatalk

[guard-sniper87]

Re: Ris Help

I araldited my rail to my de 56L

Then screwed down into the body also

Had acog on there( for sale lol )

But got a red dot on there

[ZBULLET]

Re: Ris Help

I araldited my rail to my de 56L

Then screwed down into the body also

Had acog on there( for sale lol )

But got a red dot on there

Any Pics?

Thanks ZT

[screwdriver]

Re: Ris Help

it can be done i did it to my old one before i sold it.
1/buy a length of ris
2/remove the reciever cover you will need to remove the stock to do this (i can provide a dissasembly link )
3/ mark the screw hole positions through the rail onto the top of the reciever.
4/ 4mm drill to drill reciever
5/countersink these holes from inside
6/use short m4 countersink screws from the inside and either tap your existing holes in the ris rail or use nuts set in the rail hole recess and cut screws to length if to long

their is about 3mm clearence between the inside of the reciever cover and the top of the piston assembly. link below for dissasembly

http://www.airsoftretreat.com/forums...?topic=53939.0

[seansamurai1]

Re: Ris Help



Mine already came fitted with a rail, but it was plastic and very fragile, so I dug out an old very broken sniper rifle and took the rail off that and fitted it on (The rifle I think is based on a VSR).