will these fit my CA ak-74?

[Liam Moran]

hey chaps

wanting to "RIS" my ak

will these fit as they say "for ICS" and my rilfe is classic army

http://www.zerooneairsoft.com/produc...oducts_id=3028

http://www.zerooneairsoft.com/produc...oducts_id=3029

http://www.zerooneairsoft.com/produc...oducts_id=3222

cheers guys!

[JapaneseWookie]

Re: will these fit my CA ak-74?

i would ring zeroone and ask
i bought a TM glock and a KSC glock mag as they only had that in stock, they rang and told me they arent compatible

[Boo-Sabum Ben]

Re: will these fit my CA ak-74?

my guess is not, as ics like to make things difficult with regards to 3rd party cosmetic upgrades!

[Liam Moran]

Re: will these fit my CA ak-74?

phoned zero one, they said it might fit, if not i can send it back

[Liam Moran]

Re: will these fit my CA ak-74?

this ICS full RAS kit fits the CYAM, so it should fit my AK?

[Schnakey]

Re: will these fit my CA ak-74?

The ICS Ak74 has the gas tube as part of the top handguard, if the CA is the same (Which if the front end is TMish it won't do) then it should fit

[Liam Moran]

Re: will these fit my CA ak-74?

i will take some pictures

[Liam Moran]

Re: will these fit my CA ak-74?

here is what its like inside, so will the ICS grip fit? i really want this one http://www.zerooneairsoft.com/produc...oducts_id=3028

[Liam Moran]

Re: will these fit my CA ak-74?

also this bit splits on the join

[Schnakey]

Re: will these fit my CA ak-74?

Looks like a no, gas tube is different on the ICS AK74 Not sure if the kings arms stuff will fit, I haven't got a TM type AK to hand.

[Liam Moran]

Re: will these fit my CA ak-74?

damn thats a shame... but what about if i get a ICS front iron site?

[Liam Moran]

Re: will these fit my CA ak-74?

what if i buy this http://www.zerooneairsoft.com/produc...oducts_id=4082

as i found in this picture this guy as put it on a CYMA AK that are TM clones



http://filakairsoft.30.forumer.com/i...hp?showtopic=5

[Schnakey]

Re: will these fit my CA ak-74?

Don't know why I didn't think of that myself!! I would think thats a yes then with the barrel block. There is a wee spring in there you'll need too to keep it held on tight (a clipped down recoil spring off a gbb/springer would also fit the bill if its hard to get). Should pretty much be a straight fit with that if the rest clips in right, may need a file here and a blob of glue there but I reckon it should work.

[Liam Moran]

Re: will these fit my CA ak-74?

ok thanks alot mate, will order monday morning

also i found a picture here of a G&G ak with the ICS RAS, looks very nice