Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

VSR GSPEC 400 FPSish, what bb weight?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    VSR GSPEC 400 FPSish, what bb weight?

    Hiya guys, ive recently upgraded my TM VSR GSPEC to 400 fpsish with a tightbore,120 spring,sears etc etc.

    So my question is what weight BB would be best to use now as my .25s seem to go left and right quite a bit now?

    Cheers
    Tags: None
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0
  • #2
    Re: VSR GSPEC 400 FPSish, what bb weight??

    i would use 0.28's or point 0.3's
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0

    Comment

    • #3
      Re: VSR GSPEC 400 FPSish, what bb weight??

      I would use from 0.3 upwards
      • Thank the user for this post 0
      • Like this post 0
      • Dislike this post 0

      Comment

      • #4
        Re: VSR GSPEC 400 FPSish, what bb weight??

        .3s or .36s

        Originally posted by Metalbody
        pulling one off certainly feels good
        • Thank the user for this post 0
        • Like this post 0
        • Dislike this post 0

        Comment

        • #5
          Re: VSR GSPEC 400 FPSish, what bb weight??

          cheers guys im also looking at buying a new hop rubber, should i use hard or soft ?
          • Thank the user for this post 0
          • Like this post 0
          • Dislike this post 0

          Comment

          • #6
            Re: VSR GSPEC 400 FPSish, what bb weight?

            Hard for 400-500 fps. If lower then soft will be fine.
            • Thank the user for this post 0
            • Like this post 0
            • Dislike this post 0

            Comment

            • #7
              Re: VSR GSPEC 400 FPSish, what bb weight?

              yep as above

              Originally posted by Metalbody
              pulling one off certainly feels good
              • Thank the user for this post 0
              • Like this post 0
              • Dislike this post 0

              Comment

              Previous template Next

              About the Author

              Collapse
              madness90 Find out more about madness90
              Working...
              X