Cheek riser for m4's

[flatline]

Ive just put an acog on my my and when aiming down the iron sight on the top of the acog it doesn't feel right,my face feel's like it's floating instead of resting on the stock.

Ive seen riser's on sniper rifle's but do they make them for m4's?

cheer's

[jssmitty96]

Re: Cheek riser for m4's

yes you can get them of a certain auction site ive seen them before they just velcro onto the stock if all else fails ive seen someone use an external battery bag with some padding shoved inside it strapped to a stock

[crasstoe]

Re: Cheek riser for m4's

Given the stock (crane, full, etc) you can get purpose made risers such as this;



Don't be afraid to look at Real Steel parts, as most fit with little or no modification

[Xiosis]

Re: Cheek riser for m4's

Look into a Command Arms railed M4 stock, they have a 20mm rail attachment on them and you can add a cheek raiser, I have one that I use on my KWA. Very cool bits of kit, but a pain in the rear to source the raiser as there isnt a airsoft retailer that sells them.(as far as I know anyway!)

Heres a quick pic in its old setup...



Steve

[crasstoe]

Re: Cheek riser for m4's

Steve that is epic!

To answer you PM OP, I mean parts for real M4's when I say Real Steel (just means Real World).

I would just search for these parts, as most are easily found if you look for something like "M4 Collapsible Stock Cheek Riser" etc

[Boo-Sabum Ben]

I'm going to be doing this when I get some magpul parts for mine (shame on me!)

Does that riser interfere with the stock sliding in and out? How does it attach? I'm guessing it's either clip on or screws?

[crasstoe]

Re: Cheek riser for m4's

I'm going to be doing this when I get some magpul parts for mine (shame on me!)

Does that riser interfere with the stock sliding in and out? How does it attach? I'm guessing it's either clip on or screws?

The LARUE one pictured above (I linked) slides with the stock, but you need their stock to fit it. AFAIK it is only available for real M4s...

Ben, Buying Magpul? Never! :P

[Boo-Sabum Ben]

Yeah I also discovered the price tag for that part alone! £80!

Haha it won't be too bad, just handguard, stock, riser. And maybe a bad lever just for fun!

[flatline]

Re: Cheek riser for m4's

Look into a Command Arms railed M4 stock, they have a 20mm rail attachment on them and you can add a cheek raiser, I have one that I use on my KWA. Very cool bits of kit, but a pain in the rear to source the raiser as there isnt a airsoft retailer that sells them.(as far as I know anyway!)

Heres a quick pic in its old setup...



Steve

That look's cool,can you adjust the riser?

[flatline]

Re: Cheek riser for m4's

Ive just ordered one of these

[Xiosis]

Re: Cheek riser for m4's

Yes you can adjust the raiser, as you can see in the pic above, theres a release there , just turn it and move the raiser up or down then tighten again.

Hold really well.

Steve

[V.A.K]

Re: Cheek riser for m4's

magpul ctr stocks can have an after market cheek riser fitted