KWA USP Match Takedown help needed

[AtR]

Hello forum, received my baby today and am trying to dissassemble it.
Got the manual from KWA website and am stuck on the 6th step which says

6. Glide the slide forward, away from the frame.

But it won't slide forward :<

Is there any ninja steps I missed?

I removed the barrel weights and the front part of the gun that makes it a Match.
Removed the right slide stop. Left one remains there as it's on the 6th steps picture.

[simon]

Re: KWA USP Match Takedown help needed

Have you taken the mag out?

[AtR]

Re: KWA USP Match Takedown help needed

Yes.
I am assuming that "Glide" means the same as cocking it back, but only forward, correct?

[AtR]

Re: KWA USP Match Takedown help needed

Ah, the left slide was my problem. Remembered that KWA USP Match is also referred to as KP45 so youtube was finally of help.
Thanks for the attention though.
Cheers!

[simon]

Re: KWA USP Match Takedown help needed

Yes, I'm only going of my compact, but you pull the slide half way back and aline the notch on the slide with the slide lock back catch and push the catch all the way out of the lower receiver. Than the slide should just push forward and off.

[AtR]

Re: KWA USP Match Takedown help needed

I wasn't sure as on KWAs official guide for takedown, the picture still had the left slide stop shown. Typical heh