Fuse advice

[Raptor]

Ok so i blew the fuse in my marui mp5 high cycle, any one know the correct fuse to replace it with
Thanks in advance

[JOE90]

Re: Fuse advice

i remove all my fuses unless they are set in the mosfet i may have installed, either that or replace it with a 15-20 amp

[SAS Scott]

Re: Fuse advice

The fuse has blown for a reason... Best thing to do is see if it happens again with a fuse before bypassing the fuse.

Considering is a high cycle so its far from a standard gun I would go 20-30 amps .

[Spooros]

Re: Fuse advice

Rip it all out and install a mosfet

[North West Outpost]

Re: Fuse advice

15 - 20 Amps is quite low.

A half decent LiPo and rubbish connectors will blow that for you.

[JOE90]

Re: Fuse advice

20 amps was what i ran my sopmod on with no issues, using a 7.4v lipo. But hey ho i rarely use fuses anyway, as said only if they are built into the fet i run.