Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Will a crane battery fit...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Will a crane battery fit...

    Right guys i have a s system m4 and i know 8.4v mini batteries fit but there a bugger to get in!
    Does anyone know if i can get crane stock batteries in and if soo will a 9.6v cranes stock battery fit ?

    Many thanks
    Kiran

  • #2
    Re: Will a crane battery fit...

    Get crane stock batteries to fit where?

    If you're thinking in the front handguard area, then No, they won't fit, you're better off getting a split LiPo 7.4v battery.

    Comment


    • #3
      Re: Will a crane battery fit...

      9.6v crane stock batts are quite large.
      But there are "mini ones" with around 1500mAh:

      and "large Type" ones usually around 2200mAh:

      have a measure, some crane stocks have a little spacer in that lets them take smaller batts without them wobbling around.
      -TM Recoil M16 Custom- -TM 1911 MEU- -Tanaka SAA- -TM HK45- -JG G36k Ris-
      -ECHO1 SA58 OSW- -A&K Masada- -VFC FNX-45- -TM Recoil AKs-74u-

      Comment


      • #4
        Re: Will a crane battery fit...

        Thanks should of made it clear it was for the hand guard my bad
        But thank you guys for clearing this up i found iut how to get 9.6v mini tofit
        I cant be deqling with lipos i dont trust my self , not yet anyway :p

        Comment


        • #5
          Re: Will a crane battery fit...

          You can't trust a battery that, lasts longer than Nimh, charges easier and faster, costs less, is far less likely to catch fire?

          Can't understand some people!

          Comment


          • #6
            Re: Will a crane battery fit...

            Originally posted by Andrew March View Post
            You can't trust a battery that, lasts longer than Nimh, charges easier and faster, costs less, is far less likely to catch fire?

            Can't understand some people!
            Ive never seen a nimh go up in flames. I have however seen two lipos go up.
            -TM Recoil M16 Custom- -TM 1911 MEU- -Tanaka SAA- -TM HK45- -JG G36k Ris-
            -ECHO1 SA58 OSW- -A&K Masada- -VFC FNX-45- -TM Recoil AKs-74u-

            Comment


            • #7
              Re: Will a crane battery fit...

              Depends on what you mean by a crane stock battery.

              If you mean one that's got a moulded plastic end cap so that it slides into the stock in one piece, then probably not:



              But, if you mean a battery that's split into two (or even three) groups of cells connected by wires (as also pictured above) then most will fit depending on the make of M4 and the type of handguard:



              I've even seen one of these stuffed into a cqbr handguard once. Very tight, but it did fit.
              sigpic

              Comment


              • #8
                Re: Will a crane battery fit...

                Originally posted by jonny lovegrove View Post
                Ive never seen a nimh go up in flames. I have however seen two lipos go up.
                How long ago did you see your last LiPO go up in flames?

                Comment

                About the Author

                Collapse

                fucoffee Find out more about fucoffee
                Working...
                X