Basic Tools for Aspiring Airsmith!

[mamba]

My Tool Box......No more trip to a very expensive airsmith!


And here what's inside,
1. Cylinder and Bearing oils ( I use G&P )
2. Torque set ( comes handy for Marui GB )
3. Allen keys (different sizes)
4. Silicon tapes ( for airsealing)
5. Mini flat heads and phillips screw driver (note the first is headless for pin press, separates the upper and lower receiver and taking out the gb from lower receiver)
6. Lighter ( what the heck is this doin' here... comes handy heat sinking and light my fire.....my inhalation.....hehehehehehe!)
7. Teflon grease (D' best for gears)
8. Different Silicon and teflon grease (G&P, Guarder, Marui)
9. A cutting tool
10. Needle nose pliers
11. flat head screw driver (magnetic head)
12. Short phillips screw driver (Magnetic head)
13. Long phillips screw driver (magnetic head)
14. Pick up forcep


and more
1. different fuse 20-30 amps
2. deans plug with heat sink
3. tape
4. silicon gun oil for TB barrel cleaning (different length cleaning rods not in pics)
5. Collection of bushing 6,7,8 with/without bearings
6. Spare GB screws
7. Spare hop up mechanism
8. Push pin (taking out pin near the trigger)
9. small size wrench to adjust those ris/ras mount
10. General purpose silicon grease for cleaning.
11. Front end mounting kit
12. Wrench for adjusting the butt tube.


And of course a lot of this, shims (G&P, systema, prome)


1. Screw Glue
2. Super Glue


A must.....Soldering gun



Kinda helpful..............when you're into modifications. (Dremel, kind of)


And of course, the most important tool Chrono to measure your FPS/ROF




And also you need a worn out tooth brush for cleaning you GB, degreaser, fine sand paper,
tissue paper, lint free cloth etc. etc. Techs kindly add some more if I forgot something.

[johnnyj]

Re: Basic Tools for Aspiring Airsmith!

lol mamba it all looks so new and unused the gf would be happy is all my box's looked like that !
if she lets me i will get a pic for you to lol at !

[magic_golem]

Re: Basic Tools for Aspiring Airsmith!

LOL i have all the same tools to work on guns too but in no way ahpe or form as organised as yours!!!!!

[sparrowhawk]

Re: Basic Tools for Aspiring Airsmith!

yeh i have a similar setup except that i dont have the Front end mounting kit and Wrench for adjusting the butt tube....but i a have few hand files, and a table mounted vice

[mamba]

Re: Basic Tools for Aspiring Airsmith!

lol mamba it all looks so new and unused the gf would be happy is all my box's looked like that !
if she lets me i will get a pic for you to lol at !

I just want everythin' in order everytime I'm done airsmithing for my team mates...................hehehehehehehe! Been using those for a couple of years now!

[sniperiain]

Re: Basic Tools for Aspiring Airsmith!

dude that is one sweet tool box!! mine is tiny!