What tools do you have for your airsoft tool kit?

[Sir Stephen]

since moving out i have steadily been adding to my collection, getting basics like soldering irons, wire strippers etc.
ill be doing a lot of external modding to my custom build so im also looking into getting armorers wrench and other weapon specific tools.

so since im stocking up anyway, i was wondering what you have in your airsoft tool kit, from the obvious to the little thing you have found that helps a lot (have just ordered some o-rings to fit behind the flash hiders for example)

[GhostDivisionAirsoft]

Re: what tools do you have for your airsoft tool kit?

I have all sizes of alan key, flathead+ phillips screwdriver, tamiya connecter innards and outers, electrical tape, the almighty duct tape, cable ties, long nose pliers, clippers, silicone oil and all the spare parts for my guns. I do think people should take tools to a skrimish, the amount of times I hear in the safe zone 'anyone got tool X', just bring them yourself, you will find a use for them!

[Fenrisianspirit]

Re: what tools do you have for your airsoft tool kit?

Hex keys
Screwdriver with changeable heads
Precision Screwdrivers
Froglube (Paste and Liquid)
Microfibre cloth
Scalpel

Yeah, still building mine as I'm lacking some basics. AI did a pretty good guide on a field toolkit in the issue with Navy SEALs. I wouldn't have thought to use curtain rod as a flexible cleaning rod for barrels haha.

[bob86]

Re: what tools do you have for your airsoft tool kit?

ive got half a w/shop at home but for what i take to skirmishes....

silicone spray, silicone grease, silicone oil, long bit screwdriver, screwdriver bits inc hex, terminal driver, small cross head, large and small tamiya removal tools, insulation tape, duct tape, picks, pin punches, small hammer, multi tool, metric and imperial allen keys, 3 sheets of kitchen roll, a small tool that was made for a teenie grub screw, small and large cable ties and a 3 in 1 valve tool

[patch]

I have:
Screwdriver changeable heads
Hex keys
Lube
Fuse
Bit of red and black wire
Black elec tape (a must in my book)
Cable ties

And that's about it if I can't fix it with that I can't fix it on the field .... :-)

[B.E.N.]

Re: what tools do you have for your airsoft tool kit?

I find a pot of ACME infinite patience spray is invaluable too!

[sparrowhawk]

Re: what tools do you have for your airsoft tool kit?

i like my tweezers

[seansamurai1]

Re: what tools do you have for your airsoft tool kit?

I have everything from really small hammers all the way to mauls.
Oh and a couple of allen keys and screwdrivers.

[Dr Bob]

Re: what tools do you have for your airsoft tool kit?

My only job is working as an airsoft gun technician so I have quite alot of tools..
Halfords tool chest
Half pro line ratchet/socket set, I needed this to fit my recoil kit.
Halfords screwdriver set
Cheap lydl precision screwdriver set
Mac tools bit set
Halfords ratchet driver
Verious other screw drivers which take bits
Cheap lydl bit set for undoing screws you dont want to strip]
Car interior levers (good for prying stuff apart without damaging anything)
Element pin knockers
SPEED vsr cylinder head tool
element valve key
aip valve keys
guarder valve key
SPEED m4 tool
Element motor tool
element delta ring tool/stock tool
g&p tool kit


The tools listed are the only stuff which I have used on airsoft guns that I remember. I got alot more but I will here for hours listing them all. Not to mention the mountings of spares I got.

[bob86]

Re: what tools do you have for your airsoft tool kit?

I have everything from really small hammers all the way to mauls.
Oh and a couple of allen keys and screwdrivers.

lol, why can i picture a guy with a gun across his lap. holding a pin punch delicately in place, with you stood in front of him with the biggest hammer ever seen, cocked over your shoulder ready to swing? a sort of 'you nod your head, and i'll hit it' moment.....

unless you mean something else by maul

[seansamurai1]

Re: what tools do you have for your airsoft tool kit?

My only job is working as an airsoft gun technician so I have quite alot of tools..
Halfords tool chest
Half pro line ratchet/socket set, I needed this to fit my recoil kit.
Halfords screwdriver set
Cheap lydl precision screwdriver set
Mac tools bit set
Halfords ratchet driver
Verious other screw drivers which take bits
Cheap lydl bit set for undoing screws you dont want to strip]
Car interior levers (good for prying stuff apart without damaging anything)
Element pin knockers
SPEED vsr cylinder head tool
element valve key
aip valve keys
guarder valve key
SPEED m4 tool
Element motor tool
element delta ring tool/stock tool
g&p tool kit


The tools listed are the only stuff which I have used on airsoft guns that I remember. I got alot more but I will here for hours listing them all. Not to mention the mountings of spares I got.

OOPS, get caught again did we SAS Scott/Jambwow?

[Jez Armstrong]

My new workspace, pretty much got every tool and spares you can think off
Various screw drivers, Allen keys, soldering irons all sorts

eBay does good deals for heat shrink and o-rings

[lethaldave]

Re: What tools do you have for your airsoft tool kit?

Jez, at least I know who to turn to if I run out of ammo on the field, lol, nice collection of m4 mags I think im at.. around 15? lol

Dave

[dave38x]

Re: What tools do you have for your airsoft tool kit?

I personally take the following to skirmishes:
Silicone Spray, Oil, Grease, High Tack Grease
All the punches/drivers needed to strip my guns to the bone
Pliers
Pull Through
Couple of rags

And most important of all:

BATTERY CHARGER!

[philbucknall]

Re: What tools do you have for your airsoft tool kit?

Mine has:

gas soldering iron and a wired one for home use
Delta ring armoured wrench
Daniels defence barrel nut wrench
Madbull thread cutter for upper receivers
AR 15 armorers punch set
Hex keys
Torx drivers
Philips and flat head drivers
Precision drivers
Cordless Dremel and various attachments inc the precision extension set
Pliers both normal and needle nose
Adjustable mole grips
Wire cutters
Valve keys
Magpul stock tool
Castle hut wrenches
Ar15 fore grip removal tool
Thread lock and superglue
Scalpel
Voltmeter
Battery checker
Sharpie marker
Paint pen
Spare body pins
Heat shrink
Large, small Tamils connects
XT60 connectors
Deans connectors
16 and 18awg silicone wiring

Loads of spare parts for Ver II &III gearboxes too. I'd be here all day if I listed everything. Most of mien is set up for the AR based guns though.