For people with High rofs

[Renni 95]

Hey all, i put a thread up last week about my rof because my mags wernt feeding if anybody has the same issue i tested jg,tm,G&G,Dboys,battleaxe mags

tm,G&G,Jg were utter crap but Battleaxe and Dboys work brill!
so if you want mags that feed with high rof get battleaxe or Dboys (M4)

regards
jack

[bravotwozero]

Re: For people with High rofs

Strange..

i would of thought Dboys would of been sh*te! :D

But thanks for sharing.

[Renni 95]

Re: For people with High rofs

Strange..

i would of thought Dboys would of been sh*te! :D

But thanks for sharing.

Not the only one but there all black metal highcaps feed flawlesly on a 34rrps setup so good i bought 3 more

[Pointlesshippy]

Re: For people with High rofs

I found My ICS M4 mags fed flawlessly as well but i do agree Dboys mags are the best.

[Greeny]

Re: For people with High rofs

MAG midcaps everytime :-)

[Fossilfuel]

Re: For people with High rofs

Not the only one but there all black metal highcaps feed flawlesly on a 34rrps setup so good i bought 3 more

34 rps = 2040 rpm, you sure about your rof there?

[bravotwozero]

Re: For people with High rofs

actually, 34rps does sound quite high.

[Renni 95]

Re: For people with High rofs

Thats what jigiliham told me it was i dont know were he got his info from

.. just trying to find the quote

Systema Magmum right? The problem is just this:

Systema Magnum Motor
34,845 RPM @ 9.6V
3,254 Torgue G.cm


Much much stronger, and a fair bit faster than the normal motor put into these things.
ROF.

Sorry might have got rps and rpm mixed up :S

[Fossilfuel]

Re: For people with High rofs

uhh that figure is the speed the motor is turning at.

Depending on your battery, gears and a few other variables your ROF could be up to 23 - 25 rps. I have seen some slightly higher though taht was with extreme tuning and such.

[Renni 95]

Re: For people with High rofs

What would 34,845 rpm make in rps?

[Gaffa]

Re: For people with High rofs

It's not possible to convert the RPM of a motor for example, into Rounds per second, as there are several factors to take into account.

It'd probably be easier to tell us which Motor, Spring and Gearset you're using, as well as the battery, to get an estimate for the ROF.

[Renni 95]

Re: For people with High rofs

Ahh no worrys, il just crono it sometime

[sj_asc]

Re: For people with High rofs

Run it through an Xcortech, Madbull or one of the newer Guarders and youl get an actual fire rate.
Im not sure on the dBoys mags, but i never had any real feeding problems with TM mags at with a high ROF.

[GH0ST]

Re: For people with High rofs

MAG midcaps everytime :-)

yup i second this MAG mids are the best you can buy !!

[RickyC]

Re: For people with High rofs

one of my m4s is set up for high rof and it shoots 30 rps and i use d boys high caps in that and they are fine.

can do video evidence if required