Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Hicap broken?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hicap broken?

    I was playing today and my hicap made a wirling noise, then now doesn't wind bbs to the hole.

    Any ideas what could be wrong with it?
    Last edited by markgodley; 1 September, 2013, 17:12.

  • #2
    Re: Hicap broken?

    i take it it's an m4 mag , remove the screw from the bottom and remove the inner plastic part, did a small star washer drop out as well? the spindle of the winder/spring part is held in place by the star washer and they sometimes come loose allowing the spindle to come out and release the spring.its either that or the spindle has broken where the spring goes through two slots in the spindle to secure it and the plastic on the sides breaks off so that winding does not engage the spring, if that's the problem then the mag's a gonner .

    Comment


    • #3
      Re: Hicap broken?

      What's wrong with it? It's a hi cap.

      Buy some mids!

      Comment


      • #4
        Re: Hicap broken?

        Originally posted by Coski View Post
        What's wrong with it? It's a hi cap.

        Buy some mids!
        What this chap says! :P
        IF YOU HAVE ANY L7A2 GPMG PARTS FOR SALE PLEASE MESSAGE ME

        Comment


        • #5
          Re: Hicap broken?

          This is a troll right?

          Fill it with BBs?
          Buy my stuff!

          Comment

          About the Author

          Collapse

          markgodley Find out more about markgodley
          Working...
          X