Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Quick question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Quick question

    Hey, my H hops just arrived but theres 2 one white and one black which should i use? my gun fires at 340fps and has a promethius soft hop rubber

  • #2
    Re: Quick question

    There may be a 'use the x one' answer but I'd say try both, see if you get different results
    Originally posted by Nun-Chuck
    I'm down every games day at EAG buddy just give me a shout and I'll whip it out, can have a squeeze too if you like.
    Originally posted by deanfirst
    why not use zeroone's escort service?

    Comment


    • #3
      Re: Quick question

      Originally posted by Fizzy View Post
      There may be a 'use the x one' answer but I'd say try both, see if you get different results
      aye, i would do this but i hate opening my gun up so i would have to get a mate to put this in and i dont really want to ask him to open my gun up 3 times just for the hop, plus hes also building 2 other guns for me so i dont want to be even more of a pain in the ass ya see

      Comment


      • #4
        Re: Quick question

        The silicone one provides a better seal at the cost of easier wear and tear and shorter life span. The black bucking is much more durable, works with higher fps systems, but does not create as much hop in lower fps guns.
        sigpic

        Comment


        • #5
          Re: Quick question

          Originally posted by deanfirst View Post
          The silicone one provides a better seal at the cost of easier wear and tear and shorter life span. The black bucking is much more durable, works with higher fps systems, but does not create as much hop in lower fps guns.
          so i should use the clear one?

          Comment


          • #6
            Re: Quick question

            As said mate , try both . .

            Comment


            • #7
              Re: Quick question

              Originally posted by guard-sniper87 View Post
              As said mate , try both . .
              I cant lol

              Comment


              • #8
                Re: Quick question

                the soft one is for use on guns below 380fps I think, whereas the hard one is for use on guns above, so if you cant try them both then put the soft one in, Im using a soft prometheus hop and bucking in my long gun which is on the nose 350fps and thats fine.
                section 24 of the 1968 Act
                Supplying imitation firearms to minors
                1)It is an offence for a person under the age of eighteen to purchase an imitation firearm
                2)It is an offence to sell an imitation firearm to a person under the age of eighteen.

                Comment


                • #9
                  Re: Quick question

                  Unless you are very lucky you will have to try Both! I have the black ones in a few guns and on the whole they work great. But sometimes it makes them worse. Also some makes of BB's shoot worse using these nubs than others. I have noticed better results with Classic Army guns than with TM.

                  There is no hard and fast rules with these you have to pop them in try them and then play with the setup until you get what you want. Spend some time with your hop getting it bedded in and tuned correctly.

                  As a general rule put the black one in low to standard power'd guns and the white one in high power and sniper rifles.

                  Comment


                  • #10
                    Re: Quick question

                    Originally posted by ThatblokewiththeScar. View Post
                    Unless you are very lucky you will have to try Both! I have the black ones in a few guns and on the whole they work great. But sometimes it makes them worse. Also some makes of BB's shoot worse using these nubs than others. I have noticed better results with Classic Army guns than with TM.

                    There is no hard and fast rules with these you have to pop them in try them and then play with the setup until you get what you want. Spend some time with your hop getting it bedded in and tuned correctly.

                    As a general rule put the black one in low to standard power'd guns and the white one in high power and sniper rifles.
                    Oh yays, the other guy said the white one is for low power guns and black for high grr

                    Comment


                    • #11
                      Re: Quick question

                      Originally posted by comeback View Post
                      Oh yays, the other guy said the white one is for low power guns and black for high grr
                      And there is your problem! I have the black ones in my AEG's and they work great. I had a white one in a sniper rifle and it made a massive improvement. Other people get better results the other way round. This is why you need to test new components and set them up for your gun. Just look at the Zeroone BB thread some love them some hate them. If you are going to tune your gun you are going to have to spend time on it.

                      Comment


                      • #12
                        Re: Quick question

                        Originally posted by ThatblokewiththeScar. View Post
                        And there is your problem! I have the black ones in my AEG's and they work great. I had a white one in a sniper rifle and it made a massive improvement. Other people get better results the other way round. This is why you need to test new components and set them up for your gun. Just look at the Zeroone BB thread some love them some hate them. If you are going to tune your gun you are going to have to spend time on it.
                        right :/ it can never be simple! cheers guys

                        Comment

                        About the Author

                        Collapse

                        Renni 95 Im a student, been playing airsoft since may 09- loving it Find out more about Renni 95
                        Working...
                        X