Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Upgrade/Lipo advice please.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Upgrade/Lipo advice please.

    Thinking of keeping my ICS L85a2 and saving up money for upgrades ,
    1. Is the ICS L85a2 Lipo ready?
    2.What upgrades would you suggest?(gearbox), spring , piston bla blah
    3.Just wondering If the Ares Ugl fits and what susat fits.
    If Its any help i plan to Run a 11.1 V Lipo for insane ROF-
    Any help or advice would be much apreciated, Also are there any techys out there that could give me a quote.
    Thanks.

  • #2
    Re: Upgrade/Lipo advice please.

    Insane, is in breaking into a million pieces?

    Pretty much any weapon is "lipo ready" with the correct adjustments.

    If you can correct:

    - Angle of engagement
    - Pre engagement

    Then you pretty much good to go.

    A 7.2v Lipo with G&P M120 motor and MOSFET is going to give you very fast shooting!

    Just be aware of other things to consider, like finding mags to feed at that rate!

    Comment


    • #3
      Re: Upgrade/Lipo advice please.

      Wont anything melt or brake, what piston do you recomend and are ICS gears fine, and how do you ajust angle of engagement,Sorry now on laptop, crap keyboard.

      Comment


      • #4
        Re: Upgrade/Lipo advice please.

        tm piston and i would say a mosfit is a must

        Comment


        • #5
          Re: Upgrade/Lipo advice please.

          Quotes?,,,

          any more parts,?
          any techys.?

          Comment


          • #6
            Re: Upgrade/Lipo advice please.

            I'm with Jag.

            Unless you want to be opening up your gearbox on regular occasions, the best thing you can do really is get a High Capacity (3000mAh +), High output (30C continuous +) 7.4v Lipo, with the likes of a G&P M120, Element Max Speed motor, Lightweight internal parts. Even a lower powered spring is going to up the ROF by a teeny tiney touch.

            If I may suggest it, if you're going to be running high voltage setups, considering opting for the Silver Systema high temperature low resistance wiring; I'm planning on fitting it into all of my guns. Whilst you're at it, replace/ check the trigger contacts.

            Another tip for increasing ROF - deans connectors.

            If you do all of that, with the battery mentioned and an Element Max Speed, you're going to be getting around 30 rounds per second.


            Please get in touch if you want general help. Please report problematic posts.

            Take responsibility for your choices. If you break any rule in life, you should be held accountable.

            Comment


            • #7
              Re: Upgrade/Lipo advice please.

              How much are the above items, and that was most helpful, also looking for a techy that wont rip me off.

              Comment

              About the Author

              Collapse

              iloveairsoftsniping Find out more about iloveairsoftsniping
              Working...
              X