gas m60

[b54gun]

Re: gas m60

cheers i will look into that , or may see if i can get a m249 gbb any gbb support gun will do

[Barny Hamon]

Re: gas m60

If you're not fussed which model of support gun you have then i'd suggest going with the M249 purely because the GBB Kit will drop straight in to any A&K, CA or TOP M249.

You'll need a rig consisting of bottle, regulator, and line/fittings in addition to the gun and the kit.

[Coz]

Re: gas m60

Someone was selling a GBB m249 on here a month or so back.

Dunno if that help you much, but i tried

[Major]

Re: gas m60

If you're not fussed which model of support gun you have then i'd suggest going with the M249 purely because the GBB Kit will drop straight in to any A&K, CA or TOP M249.

You'll need a rig consisting of bottle, regulator, and line/fittings in addition to the gun and the kit.

not to mention having to check with his local site to see if he could actually use it.

[Barny Hamon]

Re: gas m60

As long as its within FPS limits, what would be the issue?

[Major]

Re: gas m60

some places get a bit iffy with hpa units and the like, you can up the fps and stuff pretty easily on certain units.

[SAS Scott]

Re: gas m60

Alot of sites have also banned HPA and CO2 because most of them seem to be hot.

[Major]

Re: gas m60

some places get a bit iffy with hpa units and the like, you can up the fps and stuff pretty easily on certain units.

Alot of sites have also banned HPA and CO2 because most of them seem to be hot.

eh? hmm? wha? really?

[SAS Scott]

Re: gas m60

eh? hmm? wha? really?

I remember reading it somewhere but then this was a long time ago nowadays most new CO2 guns have been under 250 fps but when I had my CO2 pistol every site I went to asked to crono it straight away due to them thinking it was a really hot gun only for plinking .

Yeah HPA is very tricking ground as the fps can change so quick and if the electronic system was to suddenly go bellow up you could be firing 450 od fps at people.

[Barny Hamon]

Re: gas m60

What electronic system?

In the systems i'm talking about the FPS/Pressure is controlled by a regulator and to some extent the desgin of the system.

[SAS Scott]

Re: gas m60

The HPA system Im talking about is controlled by a little computer and all settings can be changed in a matter of seconds.

[Major]

Re: gas m60

The HPA system Im talking about is controlled by a little computer and all settings can be changed in a matter of seconds.

my hmming and whaing was because thats pretty much exactly what i said.

[Hawk]

Re: gas m60

To me it seems a tad impractical to have a HPA system on a support gun, you have enough weight with just the gun. Also the matter of if sites will allow you to use it

[Wolfgeorge]

Re: gas m60

There are Asahi HPA/CO2 M60 I think and GBB Escort M60.

Wolf