Sorbo impact kits.

[North West Outpost]

Re: Sorbo impact kits.

Not if you pack the piston.

I have been making my own packers for a while. Simply add to give full ajustment of fps...Simples.!

[Tyler]

Re: Sorbo impact kits.

right right.
coz takeing the amount of air thats inside the cylinder, and reduceing that amount, will result in loss of air behind the bb.
packing the piston or what ever. is going to put more strain on the gear box and resulting it the piston hitting harder due to the larger amount of weight.
makeing it pritty much what it was befor you wasted your money.
surely.

[JOE90]

Re: Sorbo impact kits.

Midas i hope your going to do an overhaul of my gearbox so it runs as yours do lol!

doubt id need sorbo with the dampen piston head though would i?

[North West Outpost]

Re: Sorbo impact kits.

right right.
coz takeing the amount of air thats inside the cylinder, and reduceing that amount, will result in loss of air behind the bb.
packing the piston or what ever. is going to put more strain on the gear box and resulting it the piston hitting harder due to the larger amount of weight.
makeing it pritty much what it was befor you wasted your money.
surely.

No, you need to do some research. Im not giving away all my secrets.

It will have much less damaging impact with sorbo.

I bet if most peoples aeg's were taken apart and you check the volume of air in the cylinder to the volume in the barrel. The majority would be well above the 1.5 (roughly) cylinder to barrel. At higher fps levels you need a much higher cylinder to barrel ratio. So it may make a difference but not isurmountable.

Do you not read the threads where a little fps makes little or no difference.

[North West Outpost]

Re: Sorbo impact kits.

I really should check my spelling befor I hit the submit reply button...I'm sure everybody knows there is an n in insurmountable...

Pads are fitted, but not re built.

Few things to address befor I put it all back together.

[North West Outpost]

Re: Sorbo impact kits.

Midas i hope your going to do an overhaul of my gearbox so it runs as yours do lol!

doubt id need sorbo with the dampen piston head though would i?

I'll give it a good going over, if you want it can be much quicker than mine, but you will have to let me tinker at my leisure.

[JOE90]

Re: Sorbo impact kits.

In a way i dont mind the speed its at to be honest, its very fast, but playing woodland, im worried about accuraccy and range etc, but guess thats what my other aegs are for. The ak is merely a showpiece and a smile creator lol just get it running fine and reliably, ill be more than happy! Thanks Mark hope them bloody hong kongians get off their new years eve parties and send my bits lol

[North West Outpost]

Re: Sorbo impact kits.

Sorbo pads and rebuilt.

I missed the fact that they are standard ratio gears and no fet. They are modified, but even so that is a decent turn of speed from the small 7.4v 1750 mAh 20C LiPo

http://www.youtube.com/watch?v=iGZOWxFbD-M

[guard-sniper87]

Re: Sorbo impact kits.

the only way you'll tell mate, is to build the whole gun and fire it,

as will silence the rifle a hell of alot when the barrel is installed

[North West Outpost]

Re: Sorbo impact kits.

Yep and fire bb's...But that will have to wait a few weeks..