H&K Rifles

[Kamikize Ants]

Re: H&K assault rifles (G36 ,416 , etc)

Nah it's a SRC g36c (so not an exact Mauri clone as I Understand), and it took a small amount of work, its not hard just fiddly, I think I had to re-bore the stock pin hole by about 0.5mm, then had to take off a mm or less of the bits where the stock and gun meet, and there's a bit underneath this needs the angle changed and moved back a bit, took about an hour and half with a dremel it total and I was just a bit forceful with the catch and now it works. As said this isn't hard but its fiddly and annoying because you have to be careful not to go slightly to far or the stock will wobble, I can get some pics if you would like.
Hope that helps~Ben

[tisane]

Newly aquired WE HK416 :D

OB conversion and a few other bits on the cards now I've finaly finished my L85.

[runefire01]

Re: H&K assault rifles (G36 ,416 , etc)

Thanks for the help Kamikize Ants! :D

[tisane]

All done
OB converted and shortened to CQB length.

[omgitzjamiiee]

Re: H&K assault rifles (G36 ,416 , etc)

VFC HK416 in its current config

[runefire01]

Re: H&K assault rifles (G36 ,416 , etc)

here is my current g36c loadout. review picture 2.jpg

[orb]

Re: H&K assault rifles (G36 ,416 , etc)

My Iron Airsoft 416 GBB with too much H&K Real Stuff




Cheers

orb

[runefire01]

Re: H&K assault rifles (G36 ,416 , etc)

that's very nice! you have my approval lol :D

[crasstoe]

Re: H&K assault rifles (G36 ,416 , etc)

ARES G36 EBB, CNC Hop Unit, Deep Fire Hop Bucking, 6.01mm Tightbore extending to the flash hider (CNC one from HK), a few secret tweaks internally and its shooting 15rps @348 on the dot every time... it was shooting 380fps but I don't fancy locking it to SEMI only, it's just too much fun with the blowback on AUTO! 20mm rails bolted on using the vents on the foregrip, Surefire 780 Lumens torch (strobe disabled), and a clone AFG to spice things up at the front. G36 PMAGS to come soon... and maybe even a box mag to make it a proper MG36...

[orb]

Re: H&K assault rifles (G36 ,416 , etc)

Here's mine.

Good oldschool G36K. Haven't seen much like this lately.
TM G36C AEG Based
Genuine H&K Parts: Handguard & Stock
Genuine Hensoldt Dual Sight Upper Receiver
Army Code Receiver, Frontset & Small Parts
Alot of tuning parts too.





Cheers

orb

[Panoptes]

Re: H&K assault rifles (G36 ,416 , etc)

VFC HK416 in its current config

Ah, you got one in the end then? Happy days!

[Panoptes]

Re: G36/G39

I've given up on the whole GBBR thing. Selling-off the G39, MP7A1 sold. Replacing with AEG again!

[bravotwozero]

Re: G36/G39

Why so, Panoptes?

[Panoptes]

Re: G36/G39

Ball-ache vs Performance, they're just not impressing me.

Always need tweaking, adjusting, fettling, sealing, tuning. The technology hasn't matured yet to the stage that they're as reliable as AEGs so I'll run with them from now.

[x-ray]

Re: G36/G39

Click here for pics (CBA to upload)


X-ray