DMR's and Ego Extenders

[Coski]

Re: DMR's and Ego Extenders

What range do you get roughly from a stock RS SVD? Just curious as everyone raves about the performance on them

Hey bud.

I couldnt comment regarding a stock one as this has a madbull tightbore in it, but I was having a good shoot with it today with .36s and whilst I couldnt say for sure as there were no range markers, I would say it was hitting around 70 metres accurately. Could be a little more or a little less, as I was only estimating, but it certainly outranges anything else I've owned, including a few bolt action sniper rifles and the Socom Gear M82.

[reece murgatroyd]

Re: DMR's and Ego Extenders

Jez, that msg90 is lovely.

More AR based im afraid. Mostly put together out of bits box.



Nice and consistant shots. Locked to semi. Getting chrono'd tomorrow, running a m150 spring. Lets hope its not TOO high. Garden is 120' and lose sight before starts to drop.

how much was that stock mate ? and where did you get it from ?

[Coski]

Re: DMR's and Ego Extenders

how much was that stock mate ? and where did you get it from ?

He got it from Zero One of course! Where else?

[ProfHappyCat]

Re: DMR's and Ego Extenders

WE/Ra-tech Mk14. with an attempt at Multisham. Apologies for the naff pictures :P
EBR.jpgEBR 6.jpgEBR 5.jpgEBR 4.jpgEBR 3.jpgEBR 2.jpg

[skippyasi]

Re: DMR's and Ego Extenders

unfortunately i cant comment on where I got it from. Did that last time and got a PM from mods. Cost me £60 though.

[Jez Armstrong]

Tis nice!

Sent from my phone using my fingers

[MisterX]

Re: DMR's and Ego Extenders

The new DMR few mods inside currently shooting 440.

Sent from my HTC One X using Tapatalk now Free

[Thunderfury]

Re: DMR's and Ego Extenders

Decided to swap the rail over just for a wee change.
Just need a new gas block/tube.

[Wolfgeorge]

Re: DMR's and Ego Extenders

I received a few custom made for my KJW KC-02.
A carbon barrel... real carbon there, the carbon tube acts as a barrel spacer, the 6.01 RA-Tech barrel barely fits in there!

]
[/URL]

Don't mind the scratches on the stock, I will fit another stock soon! I just have to find a friend to do some mods on it!


Wolf

[loki7491]

Re: DMR's and Ego Extenders

This is the now defunct DMR M16 I built.

(The top receiver is snapped at the barrel nut threads and with an M14 doing the same job and "7.62mm" I figured this could be reconfigured to something else)

WE GBBR M16 base
Semi-only mod to selector switch
Hand crafted inner barrel (was meant for AEG so I had to hand craft the hop fittings)
Inner barrel goes to about half way down the suppressor.
Modded air nozzle (runs at 445fps on a 0.2 blaster)
Over hops 0.3s with ease at 65 meters (was using Madbull .36 greens but couldn't see the buggers)

[airsoftwarrior147]

Re: DMR's and Ego Extenders

Slava what scope is that?
And drake what scope is on your majestic rifle along side the m14 as I'm trying to get one in slavas style but need a mini rods alongside and don't like offset sites

[Wolfgeorge]

Re: DMR's and Ego Extenders

Finally one of my KC-02 is almost ready!

All steel internals, the only stock parts are the hop up housing, some screws and the actual receiver!!
The only think I might do is to polish the sides of the receiver as it's on the TK 10/22!
But I'll do that at much later time...!

The scope is too big... I've my 3-9x40 on a SR25 and it's at my home, I'll take some photo's again when I have more time.

The stock is a Magnum Research Barracuda and the barrel custom made carbon barrel by Woogie! Again thank you mate!!







Wolf

[Jez Armstrong]

Re: DMR's and Ego Extenders



Sent from my SM-N9005 using Tapatalk

[Hopewell]

Re: DMR's and Ego Extenders

Please excuse the poor picture, but I have finally finished this..

Base is an ARMY recoil, R-Hopped @ 400fps.. A few other interior mods and then the externals.

Running 11.1v out of the PEQ, although not put a mosfet in there yet.

[bigglesuk11]

Re: DMR's and Ego Extenders

What scope is that?