TM MP5K overhaul

[chris3515]

Im looking to overhaul my tm mp5k and looking to replace the bushings and spring as all The rest looks okay , does anyone know which bushings fit ? Spring wise I don't want to go to power full so was looking at either a 90 or 100 spring ? Any advise much appreciated

[SAS Scott]

Re: TM MP5K overhaul

If you get an m90 or m100 it is advised you change your gearset as TM make their gears out of very soft metal so you can't make them above the legal limit in Japan...
Any 6mm bushings should fit shs or element would be fine..

An M90 would give you a power increase but should still be under 330 FPS so you can play CQB.

[Icebass]

Re: TM MP5K overhaul

With my tm mp5k I changed the gears to shs 16:1, shs 14 metal tooth piston, bearing spring guide, super shooter piston head, shs m95 spring shs 6mm metal bushes and a g&p m120, aoe corrected aswell. Shoots about 300 fps and i doubt it'll ever break down on me.