G&G GR16 Upgrade

[jamesj92]

Hey guys, I am pretty new to airsoft so I thought I would get some adivce.

I am looking at upgrading my GR16 blow back internals.

I do not want the FPS any higher then 340 though.

I am probably looking at a new inner barrel, hop up, motor.

I just want the gun to preform better, have better groupings, range and rate of fire.

Any suggestions on what I should get that would be compatable.

Thank you

James.

Edit. - Looking at spending 150-200

[jonny lovegrove]

Get a madbull blue rubber, use the soft nub.
Get a madbull python 6.03 barrel.
(can up fps by up to about 10)
If you feel like swapping the motor, teinley (think its spelt right) are brill if a little hard to find and not cheap.
SHS high torques are great but there are a few lemons.

[jonny lovegrove]

Also the plastic g&g hop is perfect for the gun, as the dials are nice and stiff so you dont lose youre setting

[jamesj92]

Re: G&G GR16 Upgrade

Could not find any of those motors so went for a systema A-Z long axel motor. Just browsing at the moment wont actually buy anything untill I am paid

[jonny lovegrove]

Re: G&G GR16 Upgrade

Aha, google SHS high torque, shopping and first like six results:/

[billy breach]

Re: G&G GR16 Upgrade

shs ultra torque motor all the way, every thing else as above, madbull hop, madbull tight bore also battery connectors to deans,

[Kieron]

Re: G&G GR16 Upgrade

If you really wanted to spend some time and money upgrading the gun , you could go for a 13:1 gear set for high rof and also a high rof motor too.

[jamesj92]

Re: G&G GR16 Upgrade

Are deans like to little box type things that you solder each side of the middle battery connector to for a better connection?

Is it easy to fit a gear set?

[Kieron]

Re: G&G GR16 Upgrade

Gears are easy , but if you get it wrong you are looking at £50 + of repairs. And yes , deans are the red box type connectors that you can crimp to your origanal battery connectors.

[jamesj92]

Re: G&G GR16 Upgrade

Cheers for the help, any other things that you would suggest? Think I will pass on the gears for now and just get a high rpm motor