building a gun around a reciever

[bob86]

ii want to buy one of these - http://www.zerooneairsoft.com/produc...oducts_id=3566 - which is a g&p m16 9mm reciever,

now what i want to know is, if i bought something like an APS m4 (as i have a raptor and love it), can i take all the internals and fit it to this? would the upper be interchangeable?? or would i have to buy a suitiable G&P front end??

[Opossum]

Re: building a gun around a reciever

Everything should swap over nicely. I have two of those receivers and most M4 bits will bolt onto them. I doubt the upper would fit though.

[bob86]

Re: building a gun around a reciever

which recievers do you have, and which upper would not fit what?

[Opossum]

Re: building a gun around a reciever

I have a stable of various M16/AR's with G&P bodies, two of which have the 9mm body. You can swap uppers with other G&P bodies, which will go on the 9mm one but I strongly doubt the APS M4 upper will go on the G&P 9mm lower.

You'd be able to basically swap the body of your APS M4 with the 9mm one.

If you did source another upper to use, I'd have the 9mm upper off your hands :D

[bob86]

Re: building a gun around a reciever

or is this a better option?

http://www.zerooneairsoft.com/produc...oducts_id=5017

[Opossum]

Re: building a gun around a reciever

It's probably the simplest solution, and easy to revert back to normal M4 mags

[bob86]

Re: building a gun around a reciever

what other makes are g&p recievers compatible with??