G36 nozzle?

[ollywallybingbong]

My brother's gen 2 src g36 has just had a new nozzle fitted ( jg make ) . When he fitted it he said it didn't feel a snug as the previous stock nozzle. He's now losing about 100fps which were guessing is down to this nozzle being a tad slack..... Can anyone suggest a better alternative?

[Ells]

Re: G36 nozzle?

prometheus make good air nozzles, cant say about the g36 one, if they make one that is from experience. If you have an o-ring nozzle, you could try soaking the o-ring in silicon lube before deciding that you need another new nozzle, howcome he changed the part?

[billy breach]

Re: G36 nozzle?

hi,

stick to the stock nozzle......it's easier and you ain't going to acheive any real advantages by changing the air nozzle

[ollywallybingbong]

Re: G36 nozzle?

prometheus make good air nozzles, cant say about the g36 one, if they make one that is from experience. If you have an o-ring nozzle, you could try soaking the o-ring in silicon lube before deciding that you need another new nozzle, howcome he changed the part?

The other one cracked mate.

[billy breach]

Re: G36 nozzle?

It shouldn'y have done that what is the fps of the gun? also make sure its lined up correctly in the hop,

[johnnyj]

Re: G36 nozzle?

100fps is a very large loss , the jg and src hops are very different if i remember correct :P . the jg has the type of nozzle found on tm,jg,star/ares g36s that has a line running along the top of the nozzle and the src looks more of a m4 type nozzle that does not have the extra bit running along the top of the nozzle ( gen3 might be different to gen2 ? )