Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

ICS L85A2 Air nozzle cycling

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    ICS L85A2 Air nozzle cycling

    So, last month I went to the mall with said gun. get to chronoing and gun isn't feeding. take to onsite tech, find out my tappet plate broke in half. Wait a couple of weeks till I buy a new plate and then fit it. everything's fine except I notice after x amount of shots one is a no feed, and then every time that happens the following shot is a double feed. After watching my air nozzle cycle on semi i've noticed that every couple of shots the nozzle sticks out either enough to stop a bb feeding or completely. I fitted a make shift delayer to attempt to fix the problem and also cut a tiny part of the tappet plate off to get the air nozzle/tappet plate to retract farther, this fixed the gun not feeding which I had before, but now the nozzle cycle seems to be out of sync, if you would. Any idea of the catalyst at all?
    The Gear Box Destroyer
    Tags: None
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0
  • #2
    Re: ICS L85A2 Air nozzle cycling

    bump, any help?
    The Gear Box Destroyer
    • Thank the user for this post 0
    • Like this post 0
    • Dislike this post 0

    Comment

    • #3
      Re: ICS L85A2 Air nozzle cycling

      help please.
      The Gear Box Destroyer
      • Thank the user for this post 0
      • Like this post 0
      • Dislike this post 0

      Comment

      Previous template Next

      About the Author

      Collapse
      Stones Find out more about Stones
      Working...
      X