Stealth mosfet part identification

[windywindmill]

Bit of a longshot but does anyone know what this part may be:

It's the top left, second down conponant that's gone:


P.s. this is the smaller trigger board

And aws has discontinued producing them so no more stealths/raptors! Lead the way ascu's!

[Clot]

Re: Stealth mosfet part identification

Looks like it could be a resistor or a capacitor... bridge it with a piece of wire and fire it back up. Might work okay

[windywindmill]

Re: Stealth mosfet part identification

I was think resistor, if all lines of investigation fail I'll bridge it

[Phatvortex]

Re: Stealth mosfet part identification

Email the bloke and ask for a schematic?

[Tom Andrews]

Re: Stealth mosfet part identification

Bridging that connection is an almost guarenteed way to destroy the board, if it wasn't already.
Try carefully removing the component from board, if you are very lucky the components value might be silk screened on the board underneath.
Otherwise a polite email to the manufacturer along with the photo might result in a reply.

[windywindmill]

Re: Stealth mosfet part identification

I've emailed aws who were kind enough to replace the whole fet with a raptor, so this is a spare that I thought I could see if I could get working, so no big loss if it does go completely. Just thought I'd give it a go fixing it.
I've asked the question as to what the part is but as yet no joy

[JOE90]

Re: Stealth mosfet part identification

take it to your local maplins, they may be able to sort you out?

[Phatvortex]

Re: Stealth mosfet part identification

take it to your local maplins, they may be able to sort you out?

PAHAHAHAHAHA.

Oh you were serious? Maplin have gone downhill for hobbyist electronics.

I'd be surprised if they even knew what a surface mount component is, let alone stock it.