Announcement

Collapse
No announcement yet.

Zero One Ads

Collapse

Burning smell ?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: Burning smell ?

    Look on the bright side m8 .. If it was a we gun it wouldn't work long enough to build up any heat at all !!!!

    Comment


    • #17
      Re: Burning smell ?

      In short it could be ANYTHING - with any new gun that I buy either second hand or new, I strip down the gun and service the gearbox, make sure its shimmed correctly etc etc. Then I re-wire it with 16awg teflon wire (only about 2.08mm thick outer diameter). Then install a mosfet. Starting over again and stripping your aeg may be the only way forward.
      Signature Removed: Please read the forum rules

      Comment


      • #18
        Re: Burning smell ?

        Can also be caused by overshimmed gears.

        Basically anything that makes the motor work harder makes it draw more power. More power = more heat....

        Comment

        About the Author

        Collapse

        CQB-Man Find out more about CQB-Man
        Working...
        X