G2010 not feeding issue

[god84]

my gng f2000 isnt feeding properly i have tried 6 different mags, i have even fed bbs direct with a speedloader. and got nothing.

what could be wrong?

[Phatvortex]

Re: G2010 not feeding issue

Can you see the nozzle whizzing in and out of the hopup when you look through the feeding tube?

[god84]

Re: G2010 not feeding issue

yes mate

[crasstoe]

Re: G2010 not feeding issue

Is your hop turned too high? This can cause the barrel to "close" too much for the bb to pass and cause a blockage.

Another thing is to check compression is ok on the gearbox and that you have no air leaks.

[Phatvortex]

Re: G2010 not feeding issue

Ok, odd. When you say it isn't feeding properly what do you mean? BBs roll out of the barrel, or nothing comes out? Have you tried running your unjamming rod down the barrel?

[god84]

Re: G2010 not feeding issue

ok havent touched the hop since i brought it and skirmished with it when it was flawless.

i have used a unjamming rod too, what happens is i get alot of dry fire then when i take out the mag exactly 3 bbs will come out on top of the mag or just drop from the magwell.

[Phatvortex]

Re: G2010 not feeding issue

Aye, but things break over time, that's just the way it is.

3 BBs will always drop out, that's normal. It's looking like you may need to take it apart to get a closer look.

[god84]

Re: G2010 not feeding issue

i was dreading that, seems a trip to my local airsoft maintenance store is needed.

[jeepy]

Re: G2010 not feeding issue

Hi.
Did you find out what it was?
Mine has started doing the same and I cant figure it out.

[god84]

Re: G2010 not feeding issue

apparently man its the tappet plate, theres a site that has them to order but i cant say which one.

[jagillham]

Re: G2010 not feeding issue

Could be one of many bits, only way to know is look. Could be tappet, air nozzle, piston etc broken. Or trouble with the hop or unit, or even mags or the BB's!