G&G FN2000 firing issue

[JC0609]

Bought this a couple of months back, excellent gun but has now stopped firing. It's not the mag or anything to do with the front end of the gun as a friend owns one and I used his front end on my own and had no joy; obviously the mags work on his.

Any help appreciated.


Cheers
JC

[jonny lovegrove]

Does it still fire? Just no BBs Come out?
Pull the trigger and nothing happens?

[Phatvortex]

Re: G&G FN2000 firing issue

Aye, symptoms would be good.

[JC0609]

Still fires, pressure that comes out seems fine, on mag release after it dry fires around 5-10 bb's fall out.


Cheers
JC

[Phatvortex]

Re: G&G FN2000 firing issue

Look into the hop unit when you're firing it, can you see the nozzle move in and out of the hop unit?

[jonny lovegrove]

Re: G&G FN2000 firing issue

Does sound likethe air nozzle isnt working right.
The bbs falling out is normal.

[JC0609]

I can see something moving in and out when it fires.


Cheers
JC

[cgswingland]

Re: G&G FN2000 firing issue

First off, turn your hop to zero, see if it makes a difference. Then clean the barrel, dirt can do all sorts. A little sprat of silicone oil in the hop unit (no more than half a second) can help.

If none of these, the bbs arent getting into the chamber, check for an obstruction. Could be an air nozzle issue as stated - which if it is will need the gearbox apart

[jeepy]

Re: G&G FN2000 firing issue

Hi.
Did you resolve this?
Mine has started doing the same thing and I cant see why.
Tried all the usual stuff, but cant narrow it down.

[JC0609]

Was solved, i purchased my friends hunter front end and it just started working, no idea why the other 2 normal front ends wouldnt work on my gun but both on his.


Cheers
JC