temporary solution for DBOYS m4 feeding problems

[Reaver]

keithhibbert:

hopefully this will be of some use

Hey mate

Solutions ( that I know of and have tried)

- shim every mag you own in order to fit. (tried and failed in this specific case)
- create a 'bumper' (seems to work for me at the moment.)
The bumper is basically there for one or two skirmishes.

Picture 1 - kitchen towel provides padding and the tape secures it into the magwell along with reducing too much wear and tear on the bumper against the mag (black foam from the protection in gun boxes works too). (the tape shown is electrical tape... Use Teflon tape)
Create a piece of folded K.towel about the size shown (representative to the BBs)

Next copy picture 2 - rest the towel in the back of the magwell

Picture 3 - apply tape so it completely covers the kitchen towel. (have the kitchen towel just an inch from the rim of the magwell.

NOTE: electrical tape will not stick as well (if not at all) as Teflon tape to the metal body.

this should make the 'bumper', its rudementory, but levers the mag into a better feeding position until a tech can get his hands on your rifle.

image.jpgimage2.jpgimage3.jpgimage4.jpg