g36 upgrade

[rebo098]

hi guys im thinking of upgrading my JG G36 and i was wondering how much you would estimate it at to get a tightbore,hop up and a new spring all fitted by someone else?If you can tell me then great.Also if any of you would be able to do this for me really cheap then even better.
cheers
rhys

[original poster]

Re: g36 upgrade

I'd estimate about £25-£30 to have them fitted obviously not including the parts!

Are you sure you need a new hop up?

[rebo098]

Re: g36 upgrade

i dont need one but i thought it would just up the game a bit, but im doing all these upgrades when something goes wrong with the gun because i dont want to nacker something up if i take it all apart

[billy breach]

Re: g36 upgrade

if your going to up grade it I would do the following:

new bearings (get metal oil free ones rather than the plastic ones that its there)
new piston metal tooth
new spring if needed to reduce/increase fps
fit a mosfet so you can run lipo batteries.
tighto bore barrel
new hop rubber only no hop up unit needed

[Phatvortex]

Re: g36 upgrade

if your going to up grade it I would do the following:

new bearings (get metal oil free ones rather than the plastic ones that its there)
new piston metal tooth
new spring if needed to reduce/increase fps
fit a mosfet so you can run lipo batteries.
tighto bore barrel
new hop rubber only no hop up unit needed

Wouldn't recommend bearings, not as durable as solid bushings especially in the 6mm guise. Just metal bushings will do you well.

You don't need a mosfet to run lipo. You need a mosfet to run high voltage batteries, which again I wouldn't recommend for longetivity if you're not confident repairing your gun yourself.

Otherwise, solid advice