G&G combat machine dissembly

[Cam]

hi,

I have recently bought a G&G combat machine, but i cant dissemble it.

I have taken out the pin, but the body will still not come apart.

I had a JG Md which came apart easily. I'm just wondering whether It's different for a combat machine.

I have searched google and youtube for a couple of hours now, and cant find any guides.

Please help.

Thanks

Cam

[johnnyj]

Re: G&G combat machine dissembly

nearly all m4's come apart the same way but i have not worked on a GnG yet

remove both body pins ( some use bunny ear locking system's) make sure the mag is out and just pull apart

on some older type of metal body's you use to have to strip all of the gun down to get in the body , remove stock , pistol grip motor , mag release , and drop the lower off leaving the gb in the upper half of the body

[Cam]

Re: G&G combat machine dissembly

what do you mean by both, (there are two!???)

[johnnyj]

Re: G&G combat machine dissembly

there is the front pin and the 1 just above the selector

[Cam]

Re: G&G combat machine dissembly

i cant find the front pin.

where abouts is it?

[Cam]

Re: G&G combat machine dissembly

Can anyone give me a rough idea?

[Fingers]

Re: G&G combat machine dissembly

front pin is usually directly behind the delta ring at the front of the magwell

[johnnyj]

Re: G&G combat machine dissembly

[Cam]

Re: G&G combat machine dissembly

oh i see, Thanks alot.

also how do you get the inner barrel out of the hop chamber?

[The Keeper of Secrets]

Re: G&G combat machine dissembly

Take of the C clip, set the hop to zero and pull gently. Watch out for the bucking (very small tube of rubber inside the hop unit) which may fall out. Don't lose it or your hop won't do anything. Best to take the barrel out with the hop unit upside down and keep it upside down, that way it'll be held in by gravity.

[Cam]

Re: G&G combat machine dissembly

cheers guys.