A little help with a ICS split gearbox

[brewer17]

Right,

Im in the process of re-wireing my ICS split gearbox from rear to front. If anyone out there has a front wired one can you do me a really big favour and crack the receiver and take a few images of where the wires sit, so I get a rough idea of how it goes.

[WAC]

Re: A little help with a ICS split gearbox

I cant photo one for you but I can try and explain it
Basically they will come out of the front left of the GB and then you route it along the top left of the magwell- the rod that holds the mock bolt release has a 'U' shaped bit on it and the wires are held in there, before going through the hole at the base of the upper

hopefully that makes some sort of sense?

[Genesius]

Re: A little help with a ICS split gearbox

If you still need help im rewiring one over the bank oil day and I can take photos for you. Pm me if you need them. But as said above they run behind the bold catch and are held in place with the 1 screw on it. Has to be thin wire thoug.